Operating instructions

Revox Joy S232 App Operating Instructions
4
Switching on through the App
The factory setting for the name that will
be shown for a Revox Joy in the Device
List is „S118, S119, S120 respectively
Symphony“. You can modify this name
under
Basic settings - Network -
Network name ID
to meet your individual
requirements, e.g. "Lounge".
There is a Power status icon shown next
to each Revox Joy.
If the icon is green, that indicates that
the Revox Joy is switched on. If the icon
is red, that indicates that the Revox Joy
is in standby mode.
Please be aware that the device cannot
be operated through the App if it is in
standby mode.
You can press on the icon with your
finger and modify the Revox Joy Power
status to your requirements.
An additional text is displayed during the
startup or shutdown process, e.g.
"Shutting down...".
If you call the Device List using the
bottom lefthand button, it can take a few
seconds until a search has been
completed over the whole network.
This state is indicated by a greyed-out
page.
Source selection
You will see a list of all the Revox Joy
sources below the name of the device
(in this example "S119"), starting with
"Last Music". If the list is not displayed,
tap on the name of the Revox Joy in the
Device List. In the case of the inputs for
the traditional sources (local inputs), you
will see either the default name or if you
have renamed the source under
Local
inputs - Rename inputs
, you will see the
corresponding alias.
You can use your finger to scroll through
the list in the usual iDevice way. To
select a source, tap on the
corresponding name.
By tapping on the bottom left-hand
button, you can always return to the
Device List, in order to select a different
Revox Joy or a new source to control.