User manual

3. Remove the hinge cover (A). Unscrew
the pins (B) and spacers (C). Fit the
hinge cover (A).
4. Remove the lower door.
5. Loosen the lower pin.
A
B
C
On the opposite side:
1. Install the lower pin.
2. Install the lower door.
3. Refit the pins (B) and the spacers (C) on
the middle hinge on the opposite side.
4. Install the upper door.
5. Tighten the spacer and tighten the up-
per pin.
Ventilation requirements
The airflow behind the appliance must be
sufficient.
min.
200 cm
2
50 - min. 200 cm
2
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do these steps.
1. Install the appliance in the niche.
Push the appliance in the direction of
the arrows (1) until the upper gap cover
stops against the kitchen furniture.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
Push the appliance in the direction of
the arrows (2) against the cupboard on
the opposite side of the hinge. Make
sure that the clearance between the ap-
pliance and the cupboard is 4 mm.
electrolux 13