FRIGORIFEROCONGELATORE KÜHLGEFRIERSCHRANK REFRIGERATEURCONGELATEUR FRIDGE-FREEZER REFRIGERADORCONGELADOR FI 260/2 TA LIBRETTO ISTRUZIONI BEDIENUNGSANLEITUNG MODE D’EMPLOI INSTRUCTION BOOKLET LIBRO DE INSTRUCCIONES 2222 203-91
WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings.
¥ Do not place carbonated or fizzy drinks in the freezer as it creates pressure on the container, which may cause it to explode, resulting in damage to the appliance. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. Never use metal objects for cleaning your appliance as it may get damaged. Installation ¥ During normal operation, the condenser and compressor at the back of the appliance heat up considerably.
USE Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly. Do not use detergents or abrasive powders, as these will damage the finish. Operation Insert the plug into the wall socket. Open the refrigerator door and turn the thermostat knob, clockwise, beyond the ÇOÈ (STOP) position. The appliance will start to operate.
Freezing fresh food The 4-star compartment is suitable for long term storage of commercially frozen food, and for freezing fresh food. To freeze fresh foods it is not necessary to change the setting of the thermostat knob. However, for a quicker freezing operation, turn the thermostat knob to the coldest setting; but remember that, in this condition, the refrigerator compartment temeprature might drop below 0¡C. If this occurs reset thermostat knob to a warmer setting.
Fresh food refrigeration To obtain the best performance: ¥ do not store warm food or evaporating liquids in the refrigerator; ¥ do cover or wrap the food, particularly if it has a strong flavour. ¥ Position food so that air can circulate freely round it. Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired.
HINTS Hints for refrigeration Useful hints: types together with the recommended storage time (in months) from the time of freezing; ¥ Meat (all types): wrap in polythene bags and place on the glass shelf above the vegetable drawer. For safety, store in this way only one or two days at the most. Cooked foods, cold dishes, etc..: these should be covered and may be placed on any shelf. Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer(s) provided.
MAINTENANCE Unplug the appliance before carrying out any maintenance operation. Warning This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.
as follows: 1. pull out the plug from the wall socket or turn the thermostat knob to the ÇOÈ setting; 2. remove any stored food, wrap it in several layers of newspaper and put it in a cool place; 3. leave the door open, place a basin on the top shelf of the refrigerator compartment, under the drain hole, remove the plug as shown in the figure; 4. when defrosting is completed, dry the interior thoroughly and refit the plug; PR138 5. keep the scraper for future use; 6.
TECHNICAL INFORMATION Energy Efficiency Class A Fridge Net Capacity lt. 196 Freezer Net Capacity lt. 44 Energy Consumption kWh/24h 0,78 Energy Consumption kWh/annuo 285 Freezing Capacity kg/24h 4 Rising Time 20 The Technical info are on the rating plate situated on the left inside the appliance. INSTALLATION Location The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.
I nstructions for totally built-in appliances Door reversibility P P 1 2 3 P1 P1 D607 Right opening Left opening Remove the pins (P) and (P1) Remove (P) from both sides and the door. Remove the middle hinge (2) and refit it on the opposite side. Refit the door and (P) on the left side. Remove (P1) from the right side. I nstructions for totally builtin appliances 50-min.
Push appliance into the housing until stop strip (A) touches the kitchen unit. A D015 Open the door and push the appliance against the side of the kitchen unit opposite to that of appliance hinges. Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap vent grille (C) and hinge cover (D) into position. D D728 C Press in the joint covers between the appliance and the kitchen unit. D724 Apply covers (B) on joint cover lugs and into hinge holes.
Position the runners (A) at the top and bottom of the inside of the kitchen unit as shown in Fig. and mark the position of the external holes. After preparing the holes, screw the runners to the kitchen unit door using 3.5x16 mm screws. A 20m m PR33 Open both the appliance door and that of the kitchen unit to approx. 90¡. Place the little plates over the runners. Hold the doors of the appliance and the unit together and mark the holes.