User Manual

Get Started

Setting Up Camera and Monitor

Connect the Micro USB cord of the power adapter to the camera and the other

end to a power outlet (110 220V AC Outlet).

Once the camera is plugged in, it will automatically turn on and the blue indicator

will be on.

Power On Baby Camera

Note:

Turn On/Off Baby Camera

• Plug in the USB power cable to turn on the camera.

• Unplug the power cable to turn off the camera.

Power On Baby Monitor

Review Live Feed

Press and hold the power button for 3 seconds to switch on/off the baby monitor.

Pull out the receiving antenna on the Monitor to establish a good connection with the

baby camera.

It takes 3-4 hours to fully charge the baby monitor to use wirelessly. If the device is

connected through the USB cable to a power source then it will stay powered.

• If the pairing is not successful, please refer to Pairing Instructions on page 10 to

repair the camera;

• If Pairing , you need to press the switch key to switch to view. If you

are pairing , press the switch key to display view. (Optional is

available to purchase separately.)

When the Baby Camera and the Baby Monitor are turned on, live footage from

the camera is showed onto the display (If the display is not normal, check the

camera pairing connection).



