User Manual

Note:
• If there is no connection for 10 seconds, the pairing mode will automatically
end. Redo the steps if not successful.
• To switch between or , press the button on the baby monitor to
return to the main menu and press the button under setting.
• The Baby Monitor can only show the viewing of 1 camera at a time. You can
can connect up to 2 cameras to each Monitor (Add-on Camera Sold
Separately).
Once the baby camera and Baby Monitor are both switched on, they will be
paired automatically. If not, follow the steps below:
Pairing
Step 1
Enter Pairing mode by turning on the camera, double press the power
button until the blue light flashes quickly, release the button.
Step 2
On the Baby Monitor, Press the Home button to get to the menu.
Navigate to the Camera . Select , select Camera 1 or Camera 2 to pair
and Press to confirm.
Step 3
Once you choose which camera to pair, the Blue light in the upper left corner
of the display will flash, when successful the flashing will stop and the
display will show the video stream of the camera.
10

