PRD615 Projector User Manual The information in this manual is subject to change without notice. Rexing All Rights Reserved www.rexingusa.
Overview Thank you for choosing REXING! We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us. care@rexingusa.com (877) 740-8004 Our support team will respond you as soon as possible. Always a surprise in Rexing. Check us out here. • https://www.facebook.com/rexingusa/ • https://www.instagram.com/rexingdashcam/ • https://www.rexingusa.
Safety Instruction Installation • To get a better watching, please use this projector while drawing the curtain or in a dark room. • Please use this projector carefully. Dropping or crashing may damage parts or result in blurred images, and abnormal displaying. Power • Be careful while using the power cord, in case of excessive bending. The damage of power cable may cause electric shock and fire. • It is better to unplug the power cord after power off. Cleaning • Unplug the power cord first.
What's in the Box? 1 2 Safety Guide 安全ガイド www.rexingusa.com 3 1. Projector 2. Remote Control 3. Power Adapter 4 5 4. User Manual 5.
Product Overview 1 3 2 4 9 5 10 6 11 7 8 12 1. Projector Lens 5. Micro SD Card Port 2. Ventilation Holes 6. Indicator Light 10. RJ45 Port 9. Power Button 3. DC-IN Terminal 7. HDMI Ports 11. USB Ports 4. SPDIF Port 8. IR Remote Sensor 12. AUX Cord Jack (Earphone Jack) Note 1. It is not allowed to wipe the lens. 2. It is recommended to keep the lens cover closed when the projector is not working.
Hole for Stand (1/4 inch) Note The air inlet and outlet on the projector is strictly prohibited from being blocked, so as to avoid damage to the projector caused by overheating (not covered by the warranty)! Power On/Off 1. Turn On: Connect the DC terminal of the power adapter to the DC-IN port of the projector. When the indicator light turns red, press the power button on the rear panel to turn it on. 2. Turn Off: Press the power button when the projector is on.
Product Parameters Display Chip 0.45” DMD Lens high light transmittance coating glasses Brightness Uniformity: 98% NTSC ≥120% Projection Size 40-150 inch Throw Ratio 1.2:1 Keystone ±40 degree physical correction Focus Mode Electronic focusing Power Adapter DC19V/3.42A Total Power 50W Speaker 3W×2 Dimensions 9" x 5.5" x 1.75" Product Weight 2 lbs Physical Interface DC Power Jack ×1 USB 2.0 ×2 Micro SD Card Port ×1 3.
Remote Control and Focus Adjustment 1 150 inch 120 inch 2 3 9 100 inch 80 inch 60 inch 4 10 5 11 6 12 7 13 8 5.25 ft 6.5 ft 8.5 ft 10 ft 12.5 ft For the first time, please match the remote control with the projector as follows 1. Turn on the Bluetooth connection 2. At the same time, press and hold the following two buttons for 3 seconds, the indicator light flashes quickly, the remote control and the projector enter the pairing mode. and 3.
USB Interface Mouse/keyboard can be connected to the projector through USB interface. Videos, audios and pictures in U disk can be read through USB interface. Apps in APK format can be installed through it as well.
Play via USB Signal Insert the USB flash drive with audios, videos and texts into the USB port. In the Apps choose MediaPlayer, and then enter into the playback category to select what you need.
Play via HDMI Signal Connect the Blu-ray DVD or computer to the projector through HDMI port. The optimal resolution of the projector is 1280×800. Under the Apps interface, select the HDMI option and enter the HDMI channel. (Picture 1) Or press the Source button on the remote control and select the HDMI option in the menu.
Connect to Wi-Fi Step1: In the Settings interface, select Network. Step2: After entering the interface, select Wireless setting. Step3: Open Wi-Fi, select the Wi-Fi you want to connect in the list below, and type the correct password, click CONNECT to confirm.
Connect to Bluetooth Step1: In the Settings interface, select Network. Step2: Select the Bluetooth option, choose the corresponding Bluetooth device, and follow the tips to connect.
Projection Setting In the Settings interface, select Projector setting; 1. Projection Method Choose “Projection Diret” and press the OK button to choose the desired projection method. 2. Quadrangular Correction Select "Quadrangular Correction" and press the arrow keys on the remote control to adjust the four corners of the picture until they are at right angles. 3. Choose Zooming Ratio and press the OK button to set 16/10 & 16/9 & 4/3 respectively.
3D Function 3D Video Playback: The format of video source is 3D. During playing, press and hold the menu button on the remote control, select "3D" option in the menu, and choose the corresponding 3D mode according to the 3D source. Settings Projector Settings Front LED Bright User Picture Mode Normal 3D Close 3D Close Up Down 3D Left Right 3D Up Down 3D->2D Left Right 3D->2D Note: 3D function is not supported when using Quadrangular Correction.
Online Update Step1: First, make sure the network is smooth. Step2: Select Update in the Settings interface. Step3: Check the current version and update the system as tips.
Miracast 1. Install EShare for Android Please make sure your android device is connected to the same network with your projector, launch EShareServer on the projector, scan the QR code or visit the web page according to the IP address provided, download and install EShare for Android. 1. Connect your device to XXXXX; 2. Visit http://192.168.XX.XX:8000 with web browser or scan the QR-code to download the app. 3. Launch EShare and click on EShare-XXXX to connect. 2.
iOS Cast 1. Install EShare for iPhone Search "Eshare" directly in iPhone App Store or install application according to the directions pushed by Eshare Software from the projector. EShare for iPhone Shenzhen EShare... 2. Connect to Projector After the installation of EShare, launch it on your mobile device, and it will start to search for the projector in the same network. 1. Connect your device to XXXXX; 2. Visit http://192.168.XX.XX:8000 with web browser or scan the QR-code to download the app. 3.
Warranty & Support Warranty The Rexing PRD615 projector comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours.
FCC ID: 2AK43RD-606 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
