User Manual

Getting Started

Installing your F10 Dashboard Camera

• The device can be used while it is charging, although it may take

longer to fully charge the battery.

• If the device receives an unstable power supply while charging, the

screen may not function properly. If this happens, unplug the charger

from the device.

• While charging, the device may heat up. This is normal and should

not affect the device’s performance or lifespan.

• If the device is not charging properly, take the device and the charger

to an authorized Rexing Service Center or contact Customer Care.

Connecting the charger improperly may cause serious damage to the

device. Any damage caused by misuse is not covered by the warranty.

Inserting the Memory Card

Your device accepts memory cards with a maximum capacity of 32GB.

Depending on the memory card manufacturer and type, some cards may not be

compatible with your device. Using an incompatible card may damage the

device or the memory card, or corrupt the data stored on it.

Recommended Card Type: High Endurance Micro SD Card

Use caution to insert the memory card right-side up as shown in the image

(See: Page 24).

• Insert memory card with the gold-colored contacts facing upwards.

• Push the memory card into the slot until it locks in place.

• Click sound when memory card locks in place.

• Using a coin or other tool push memory card will make it easier.