User Manual

Getting Started

Installing your F10 Dashboard Camera

Removing the Memory Card

Before removing a memory card from your computer, you must first prepare it

for safe removal.

Before removing a memory card from your device:

1. Press the Power/OK button to stop the device from recording

2. Press and hold Power/OK button to power the device off.

3. Gently push the memory card in until you hear a click, and allow the

spring release to push the card out.

Do not remove the memory card while the device is transferring or

accessing information. Doing so can result in data loss or corruption, or

damage to the memory card or device. Rexing is not responsible for losses that

result from the use of damaged memory cards, including the loss of data.

Formatting the Memory Card

Using the camera to format the memory card:

1. Press the Power/OK button to stop recording

2. Press the MENU button twice to enter the settings menu

3. Use the ▲ ▼ buttons to navigate down to the "Format" option

4. Press Power/OK to confirm your selection

5. Use the ▲ ▼ buttons to navigate to the “Yes” option

6. Press Power/OK when the word “Yes” is highlighted in blue

Before formatting a memory card, always remember to make backup

copies of all important data stored on the device. The manufacturer’s

warranty does not cover loss of data resulting from user actions.