User's Manual

9
the Menu Button to shift to the next setting. Press the Up/Down Button to set
the parameters. Press the OK Button to save and exit.
Note: To obtain a valid date and time record to be used as evidence for a car
accident, please set the correct time and date before using the device.
2. Screen Backlight: Off, 1, 3, and 5 minutes. When Off is selected, the
screen remains on. Select 1/3/5 minutes. Without any operation, the screen
backlight turns off automatically after a predetermined length of time, but the
device will keep recording as normal.
3. Key Tone: Off/On
4. Language Setup: English, French, German, Spanish, Italian, Portuguese,
Simplified Chinese, Japanese, Traditional Chinese, and Russian.
5. Frequency：50HZ, 60HZ
6. IR Light Mode: Auto, On, Off
7. Formatting: Cancel/Confirm. Select Confirm to format the storage card.
Note: Formatting removes all files (including protected files) from the
storage card. Files cannot be restored after formatting. Please back up
important files before formatting.
8. Default Setup: Cancel/Confirm. When Confirm is selected, customer
settings will be changed and the system will be restored to its default values.
9. Version: Determine the current software version.
Taking Pictures
I. Taking a Picture
Depress the Menu Button to switch to the picture taking mode. Press the OK
Button once to take a picture.
II. Picture Mode Setup
When the picture taking function is in standby, press the Menu Button to
access the picture taking setup menu. Use the Record/UP button and
Record/DOWN button to select parameters. Press the OK Button to save your
setup selections and return to the previous menu. Press the Menu Button to
exit setup when complete.
1. Picture Taking Method: Single Shot, 2s Timer, 5s Timer, 10s Timer
2. Resolution: 12M 4032 x 3024, 10M 3648 x 2736, 8M 3264 x 2448, 5M
2592 x 1944, 3M 2048 x 1536, VGA 640 x 480
3. Continuous Capture: Off/On When continuous capture is enabled, 3
pictures are taken consecutively.
4. Picture Quality: Optimum, Standard