User's Manual

Carry Clip Removal
Standard spring belt clip
This is the traditional type most users are familiar with. It allows the
Spk Mic to be clipped to work vests, clothing, epaulettes, etc.
For maximum performance 360º around your vehicle it is recom-
mended that it be worn in a location that allows the antenna
to protrude above you body. The antenna should always be lo-
cated os that
To remove follow these three photos: Locate the metal securing
tag - Press the tag away from the Spk Mic whilst sliding the clip
upwards.
Identify
release
tag
Push out
while
sliding
clip up
5
DC charging: place into charger to automatically re-charge.
Headset connector: use with associated** headsets/accessories.
Earpiece jack: allows private listening via 3.5mm mono earpiec-
es.** The loudspeaker is disabled when 3.5mm plug is inserted.
Loudspeaker: Delivers loudspeaker audio - Automatically turns
off when inserted into mobile/base charger.*
Status light: glows blue when connected and operational. It will
ash when “out of range” or when the mobile charger unit is off.
from your Wireless Speaker Microphone supplier.
SMA Connector : Vital for maximum range. Unscrews at connector
to allow replacement if damaged. Use only original replacement