User's Manual Part 2

11. External Speaker/Mic Connector
12.Battery Pack:
13. Release Buckle
14. Priority Button
15. PTT (Push To Talk) Button
16. MON (Monitor) Button
Fitting & Removing the Battery Pack
：
To install the battery pack:
1. Fit the bottom edge of the
battery pack into the holes
of the transceiver bottom.
2. Push the battery pack down to the transceiver’s
aluminum chassis till a chip sound is heard.
To remove the battery pack:
1. Keep pressing the release
buckle of the battery
pack and lift the battery
pack up from the
transceiver’s body.
Charging the Battery Pack：
1
LIFT UP
2
PUSH DOWN