User`s manual

Page 3
Fit the bottom edge of the battery pack into the holes of the
transceiver cabinet bottom.
Push the battery pack down to the transceiver aluminum
chassis till the end click.
1]
2]
Connect the jack of AC adaptor into the socket of the
charging cradle.
Plug the AC adaptor into the power outlet.
Insert the radio into the cradle.
Charge the radio with standard charger for 10-12
hours;with rapid charger for 2 hours.
Make sure the radio is turned off while charging.
Do not forget to remove the radio from the charger
when the battery is fully-charged.
1]
2]
3]
4]
Fitting & Removing the Battery Pack
To Install the battery pack�
To remove the battery pack
Keep pressing the release buckle of the battery pack and lift the battery pack up from the trans-
ceiver body. Note: It is normal for this buckle to be stiff.
Charging the Battery Pack
�