Operation Manual

PAGE 6
Operation Modes
There are four types of operation mode .
1. VFO mode (Frequency mode): This mode
shows only frequency on the display. All
menu settings will be changed & stored as
the latest value permanently, after pressing .
2. Channel number mode: At this mode, all
settings are done through PC programmer.
The user is not allowed to change any set-
tings of the radio.
3. Channel+Frequency mode: At this mode,
frequency and channel number are shown
on LCD. The user can temporarily change
radio settings after pressing . Once the radio is turned off or
switched to another channel, the temporary setting will be erased
and back to initial settings. Press and to remove this
channel from scan list permanently. (Delete a nuisance channel
during scan.)
4. Channel+Name Tag mode: After press-
ing and then , you can rotate
the power knob to change name tag per-
manently. You can also temporarily change radio’s settings after
pressing . Once the radio is turned off or switched to another
channel, the temporary setting will be erased and back to initial set-
tings. Press and buttons to remove this channel from
scan list permanently. (Delete a nuisance channel during scan.)
 There are three levels of operation menu; shortcut operation
menu, channel setting menu and radio setting menu.