Operation Manual

PAGE 10
You will receive only messages coming from those parties sending
a proper TX signaling. (By this way, more radios share the same fre-
quency.) If an incorrect code or no code is received, LED glow green
but squelch will still remain mute.
Advanced Manual Operations
• Editing A Channel
1. In VFO mode, turn power knob to select the frequency you need.
2. Press button to edit all settings in channel mode.(Please refer
channel mode settings)
3. Press button, LCD will show “FUNC”. Then, press but-
ton, and LCD will appear “WAIT”.
4. Rotate power knob to choose a channel would be stored with the
above setting.
5. Press button, LCD will show “FUNC”. Then hold button
for 2 seconds till LCD appears “COPY”. Finally the radio sounds
2 beeps, “COPY” is disappeared and the channel editing is stored
successfully.
• Duplicate A Channel
1. In VFO mode, press button to get into channel mode. Then
rotate power knob to select the source channel.
2. Press button, LCD will show “FUNC”. Then, press but-
ton LCD will appear “WAIT”
3. Rotate power knob to select the destination channel.
4. Press button, LCD will appear “FUNC”. Hold button for
2 seconds till LCD shows “COPY”. Finally the radio sound 2 beeps,