Operation Manual
PAGE 11
“COPY” is disappeared and the channel duplicating is stored suc-
cessfully.
• Delete A Channel
1. In VFO mode or channel mode, press button, LCD will show
“FUNC”. Then, press button, LCD will appear “WAIT”.
2. Rotate power knob to select a channel being deleted.
3. Press button, LCD will show “FUNC”. Hold button for 2
seconds till LCD appears “CLEAR”. Finally the radio sound 2 beep,
“CLEAR” is disappeared and channel is deleted successfully.
4. Repeat step 2 & 3 to delete more channels continuously.)
5. Press button to exit
• Channel Name Tag
In channel name tag mode, press button and then press
button to edit its channel name tag. Rotate power knob to set alpha-
numeric you want. Press
button for previous character or
button for next character. Finally press
button to confi rm and
exit.
• Make A Signalling Call
Press button to make a signalling call, if this channel has bee
programmed with signalling (DTMF, 2-Tone, 5-Tone) by your dealer. .
• Scan
Frequency/Channel Scan (Carrier Scan)
Press
button repeatedly until LCD shows “FREQ/CH SCAN?”,
then press
button to begin scanning per frequencies or per chan-
nels.
During scanning, press UP/DOWN button on the Mic or rotate power