Operation Manual

PAGE 14
“REVERSE ON” : TX & RX will be reversed.
“REVERSE OFF”: TX & RX will remain as it is programmed.
• Searching & Dialing Pre-stored DTMF String
RM-03N can be programmed with 16 pre-stored DTMF string dial.
(Pre-stored DTMF string dials must be edited through PC program-
mer)
1. Press button once, and then press button to get into
pre-stored DTMF dial list. “EMPTY” means there are nothing in
pre-stored code.
2. Rotate power knob or press UP/DOWN on the Mic to choose DTMF
string dial.
3. Press PTT or button to send DTMF string dial.
 In Channel number mode, the user is not allowed to choose
DTMF dial manually.
• Delete A Nuisance Channel
lt allows you to remove the channels which you don’t want to hear
from the scan list. Press
button once and press button to
switch SKIP ON/OFF.
1. “SKIP ON” indicates current channel will be deleted from scan list.
2. “SKIP OFF” indicates current channel will be remaining the scan
list.
 This operation is only available in channel + name mode &
channel + frequency modes. It is invalid in channel number mode &
VFO mode.