Operation Manual

PAGE 15

Menu for Radio’s General Setting

Any changing on the general settings will be stored permanently.

These general settings can be done through buttons in any mode

(VFO/Channel):

3. Keep pressing

for 2 seconds to get into general setting menu

of RM-03N.

4. Press button repeatedly or press Up/Down key on extended

microphone till desired setting appears.

5. Rotate power knob to change the setting.

6. Press button conﬁ rm and exit.

• Beep Enable/Disable

The beep sound indicates conﬁ rmation of entry, error status, and

malfunctions.

1. Hold button for 2 seconds to get into general setting menu.

2. Press button repeatedly or press Up/Down key on extended

microphone till LCD displays “BEEP”

3. Rotate power knob to select ON or OFF.

4. ON: Beep enabled ; OFF: Beep disabled

 Default: ON

• TOT (Time-out timer)

TOT is the function that prevents from locking up a repeater or fre-

quency by prolonged keying of PTT. The time-out timer limits the

amount of time you have to transmit your message. When you reach

the time limit which has been programmed by your dealer, your trans-

mission will be cut off. In order to transmit again, you must push PTT

button to reset the timer.