Operation Manual

PAGE 21

Menu for Channel Settings

In channel modes, including channel + frequency mode & channel

+ name tag mode, the edition of channel menu setting is a temporary

changing. Once you turn the radio off or switch to other channel, this

temporary setting will be erased and back to initial channel setting by

PC programmer.

1. Under Channel modes, press button to get into channel

menu.

2. Press the button repeatedly or press Up/Down key on ex-

tended microphone to turn through the channel menu.

3. Rotate power knob to set parameter.

4. Press or button to conﬁ rm and exit the channel menu

setup.

 This edition is invalid in channel number mode. The edition

of channel setting in VFO mode will be stored permanently.

• Sub Tone (CTCSS/DCS) Encode Setup

1. Press button to get into channel menu.

2. Press button repeatedly or press Up/Down key on extended

microphone till LCD shows “CTDCS/ ENCODE”

3. Press button to select CTCSS, DCS or OFF. When DCS is

selected, press button to select N or I (positive /inverse)

4. Rotate power knob to select CTCSS/DCS subtone.

5. CTCSS code: 62.5Hz-254.1Hz, total 51 subtones.

6. DCS code: 000N-777I, total 1024 codes, N stands for positive code,

I stands for inverse code.

 Default : 023N