Operation Manual
• Priority Scan ...............................................................12
• TX Power Selection.................................................12
• O set ...........................................................................13
• Band-Width Selection .........................................13
• Voice Compander ................................................13
• Reverse TX/RX ...........................................................13
• Searching & Dialing Pre-stored DTMF String .14
• Delete A Nuisance Channel ..................................14
Menu for Radio’s General Setting .......................15
• Beep Enable/Disable ...............................................15
• TOT (Time-out timer) .............................................15
• APO (Auto Power O ) ............................................16
• BCLO (Busy Channel Lockout) & BTLO ..............16
• DTMF Transmitting Time ......................................17
• Squelch Level Setup ...............................................17
• Scan Dwell Time Setup ..........................................18
• LCD Backlight ............................................................18
• Check Working Voltage .........................................18
• Burst Tone Selection ...............................................19
• DTMF ANI On/O .....................................................19
• Channel Mode Setup .............................................19
• Factory Default ........................................................20
Menu for Channel Settings ..................................21
• Sub Tone (CTCSS/DCS) Encode Setup ............21
• Sub Tone (CTCSS/DCS) Decode Setup .............22
• DTMF/ 5 Tone/ 2 Tone Decode Selection ......22
•
Priority Scan
...............................................................
12
•
TX Power Selection
.................................................
12
•
O set
...........................................................................
13
•
Band-Width Selection
.........................................
13
•
Voice Compander
................................................
13
•
Reverse TX/RX
...........................................................
13
•
Searching & Dialing Pre-stored DTMF String
.
14
•
Delete A Nuisance Channel
..................................
14
Menu for Radio’s General Setting
.......................
15
•
Beep Enable/Disable
...............................................
15
•
TOT (Time-out timer)
.............................................
15
•
APO (Auto Power O )
............................................
16
•
BCLO (Busy Channel Lockout) & BTLO
..............
16
•
DTMF Transmitting Time
......................................
17
•
Squelch Level Setup
...............................................
17
•
Scan Dwell Time Setup
..........................................
18
•
LCD Backlight
............................................................
18
•
Check Working Voltage
.........................................
18
•
Burst Tone Selection
...............................................
19
•
DTMF ANI On/O
.....................................................
DTMF ANI On/O .....................................................DTMF ANI On/O
19
•
Channel Mode Setup
.............................................
19
•
Factory Default
........................................................
20
Menu for Channel Settings
..................................
21
•
Sub Tone (CTCSS/DCS) Encode Setup
............
21
•
Sub Tone (CTCSS/DCS) Decode Setup
.............
22
•
DTMF/ 5 Tone/ 2 Tone Decode Selection
......
22