22-AUG-2019 56312E37 RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna PRODUCT DESCRIPTION REYAX's RYWB116 module provides a comprehensive multi-protocol wireless solution including 802.11 b/g/n, dual-mode Bluetooth 5. FEATURES • • • • • • • • • • • • Compliant to single-spatial stream IEEE 802.11 b/g/n, Bluetooth 5. Co-existence of multiple wireless protocols managed by an internal protocol arbitration manager.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna BLOCK DIAGRAM Filter RF Switch RS9116 QMS 40MHz Crystal PIN DESCRIPTION U1 RYW B116 SPI_IO_VDD SLEEP_IND_FROM_DEV SPI_CLK W URX 29 28 27 26 25 24 23 22 UART1_RTS NC 30 21 20 19 18 17 16 10 Copyright © 2019, REYAXTECHNOLOGY CO., LTD.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna Pin Name I/O Condition 1 GND - Ground 2 SPI_INTR O SPI_INTR: SPI Slave interface Interrupt Signal to the Host. 3 SPI_MISO O SPI_MISO: SPI Slave interface Master-In-Slave-Out signal. 4 SPI_CSN I SPI_CSN: Active-low Chip Select signal of SPI Slave interface. 5 SPI_IO_VDD I I/O Supply for GPIOs (1.9-3.6V). 6 SPI_CLK I SPI_CLK: SPI Slave interface clock.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna 28 VBATT I The power gate reduces sleep mode current. Please refer to the EVB Schematic. Input supply voltage (1.75-3.6V). 29 NC - Leave Unconnected. 30 GND - Ground Copyright © 2019, REYAXTECHNOLOGY CO., LTD.
SPI Interface CON1 CON-2*6Pin 1 2 CON1 CON-2*6Pin 1 2 3 4 3 4 5 6 5 6 7 8 7 8 9 10 9 10 11 12 11 12 13 14 13 U1 RYWB116 14 +5V +5V +3.3V +3.3V-M U2 AMS1117-3.3V R1 NC +3.3V 2 3 4 SPI_MISO 6 SPI_CSN 5 7 8 9 10 1 GND 2 SPI_INTR 3 SPI_MISO SPI_IO_VDD 5 SPI_CLK 6 SPI_IO_V DD 12 SPI_MOSI 7 13 14 UART1_RX 8 UART1_TX 9 UART1_TX UART1_RX GPIO_50 6 GPIO.0 / TXT C5 10uF R2 1K 18 17 UART1_RTS NC POC_OUT NC 21 20 19 18 Q1 AO3418 +3.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna SPECIFICATION Item Operation Voltage Min. Typical Max. Unit 1.75 3.3 3.6 V 400 mA TX Mode Current WLAN Data Transfer Average Current WLAN Data Receive Average Current WLAN Standby Associated Mode Current WLAN Standby Associated Mode Current Quiescent current Baud Rate 9600 mA 11Mbps Tx 48.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna DC CHARACTERISTICS RESET_N PIN Symbol Min. Typical Max. Unit Parameter VIH 0.8 VDD 3.63 V High level input voltage VIL Vhys -0.5 0.05 VDD 0.3 VDD V V Low-level input voltage Hysteresis voltage DIGITAL INPUT OUTPUT SIGNALS Symbol Min. Max. Unit 2.0 3.63 V -0.3 0.1 VDD 0.8 V V V V mA mA VIH VIL Vhys VOL VOH IOL IOH Typical 0.4 VDD-0.4 2.0 2.0 4.0 4.0 12.0 12.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna 24 Mbps OFDM 36 Mbps OFDM 48 Mbps OFDM 54 Mbps OFDM MCS0 Mixed Mode MCS1 Mixed Mode MCS2 Mixed Mode MCS3 Mixed Mode MCS4 Mixed Mode MCS5 Mixed Mode MCS6 Mixed Mode MCS7 Mixed Mode 19 dBm 18 18 17 20 20 20 19 17.5 17.5 17 14 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm WLAN 2.4 GHz RECEIVER CHARACTERISTICS Parameter Sensitivity for 20MHz Bandwidth Maximum Input Level for PER Conditions Min.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna below 10% Adjacent Channel Rejection 11 Mbps CCK 54 Mbps OFDM MCS0 Mixed Mode 1 Mbps DSSS 11 Mbps CCK 6 Mbps OFDM 54 Mbps OFDM Return Loss RSSI Accuracy Copyright © 2019, REYAXTECHNOLOGY CO., LTD.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna BLUETOOTH TRANSMITTER CHARACTERISTICS Parameter Transmit Power Power Control Step Adjacent Channel Power |M-N| = 2 Adjacent Channel Power |M-N| > 2 Conditions BR, EDR LE BR, EDR BR EDR LE BR EDR LE Min. Typical 20 -1 3 -20 -20 -20 -40 -40 -30 Max.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna LE, adjacent +2 MHz LE, adjacent -2 MHz LE, adjacent >=|±3| MHz Copyright © 2019, REYAXTECHNOLOGY CO., LTD.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna REFLOW SOLDERING Consider the "IPC-7530 Guidelines for temperature profiling for mass soldering (reflow and wave) processes, published 2001. Preheat phase Initial heating of component leads and balls. Residual humidity will be dried out. Please note that this preheat phase will not replace prior baking procedures. • • • Temperature rise rate: max.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna DIMENSIONS 0.6±0.1 1.1±0.1 5.2±0.1 16.7±0.3 13.0±0.3 5.6±0.1 10.4±0.2 0.7±0.1 1.4±0.1 0.8±0.1 16.7±0.3 11.6±0.2 0.8±0.1 0.7±0.1 1.4±0.1 13.0±0.3 Unit : mm Copyright © 2019, REYAXTECHNOLOGY CO., LTD.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna LAYOUT FOOTPRINT RECOMMENDATIONS 16.7 0.5 0.8 Anti cooper area 0.7 1.0 1.0 1.0 13.0 Unit : mm Copyright © 2019, REYAXTECHNOLOGY CO., LTD.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna Top layer Anti copper area Bottom layer Copper area Copyright © 2019, REYAXTECHNOLOGY CO., LTD.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RYWB116 2.4GHz Ultra Low Power Wi-Fi / Bluetooth 5.0 UART/SPI Interface Module with Integrated Antenna RF Exposure All transmitters regulated by FCC must comply with RF exposure requirements. KDB 447498 General RF Exposure Guidance provides guidance in determining whether proposed or existing transmitting facilities, operations or devices comply with limits for human exposure to Radio Frequency (RF) fields adopted by the Federal Communications Commission (FCC).
