Replacement Parts Guide

ManualsBrandsReznor ManualsHeatingFan Control for Reznor F/FE-50-165 Unit Heaters, 135 F

Table Of Contents

Form P-FAN&LIMIT, P/N 147678 R2, Page 1

Replacement Parts/Service

IMPORTANT

1. Always include complete heater model and serial number

so that any specication change can be considered for

parts shipment. It can save time and expense.

2. Check temperature setting on control being replaced.

3. We reserve the right to substitute functional replacements.

4. Specications are subject to change without notice.

APPLIES TO: Functional Replacement

Fan/Blower Controls and

Limit Controls

P-FAN&LIMIT (Version B)

Obsoletes Form P-FAN&LIMIT (Version A)

TABLE 1 - Functional

Replacement Fan/

Blower AND/OR

Limit Controls by

Heater Model Group

listed alphabetically

(applies to currently

manufactured units)

�

Footnotes for TABLE 1:

IMPORTANT: Always verify

temperature setting of the

original control.

Model B Sizes 50, 75, & 100

manufactured prior to 9/96

use limit control, P/N 45602

(180°F).

Models B and F with spark

pilot manufactured after

9/99 (Serial No. Date Code

AYJ) do not have an ECO

limit control.

P/N 209184 is a relay kit

to replace discontinued

fan control P/N 10357. Kit

includes instructions.

Furnace next to the blower.

Second furnace from the

blower

Third furnace from the blower.

SECTION 1

Table of Contents

SECTION 1 - Table 1, Functional Replacement Fan/Blower and/or Limit Controls for currently manufactured Models/Series 1

SECTION 2A - Table 2, Functional Replacement Fan/Blower & Limit Controls for no-longer-manufactured Models/Series .....3

SECTION 2B - Installing Replacement Fan Control on Models (C)XL, (C)EEXL, (C)XLB, and (C)EEXLB .................................... 6

SECTION 2C - Installing Functional Replacement for Discontinued Fan Control, Relay Kit P/N 63254 .......................................7

(continued on page 2)

Model Size Limit Control Fan Control

ADF All Sizes

122856 (130ºF), auto, orange

None

122858 (135ºF), manual, pink

82414 (306ºF), ECO Device

ADFH All Sizes

19080 (155ºF), auto. yellow

None

122990 (175ºF), manual, tan

82414 (306ºF), ECO Device

25 45602 (180ºF), auto, white

123975 (150ºF)

50, 75, 100

85449 (200ºF), auto, yellow

125-400 100799 (150ºF), auto, white

ECO Limit

Control for B

25-50 131449, (228ºF)

75-400 131450, (306ºF)

CAUA

150, 200

148588 (270ºF) w/60" capillary

None

Flame Rollout Limit,

112752, (225ºF)

250, 300

164792 (300ºF) w/54" capillary

Flame Rollout Limit,

121275, (275ºF)

350, 400

148588 (270ºF) w/60" capillary

Flame Rollout Limit,

112752, (225ºF)

(H)EEDU All 45602, (180°F), auto, white 147611

25 85449, (200ºF), auto, yellow 123974 (135ºF)

50 85449, (200ºF), auto, yellow 123976 (135ºF)

75, 100

85449, (200ºF), auto, yellow 123976 (135ºF)

125 45602, (180°F), auto, white 123976 (135ºF)

130, 165 82091, (160°F), auto, red 123976 (135ºF)

200 85449, (200°F), auto, yellow 123974 (135ºF)

250, 300, 400

45602, (180°F), auto, white 123974 (135ºF)

ECO Limit

Control for F

25-50 131449, (228ºF)

75-400 82414, (306ºF)

LDAP

400

Limit,

112753 (150°F), white

None

Limit,

202048 (240°F), auto, silver

800

(2) Limit,

112753 (150°F), white

(2) Limit,

202048 (240°F), auto, silver

1200

(3) Limit,

112753 (150°F), white

(3) Limit,

202048 (240°F), auto, silver

All Linear Limit w/60" Capillary, 148588 (270°F), auto

95 Fan & Limit Control Assembly, P/N 123977

140, 190 Fan & Limit Control Assembly, P/N 123973

PDH/SDH/RDH

75-150 40" Capillary, Auto Reset, P/N 210854 (190°F), yellow

None175-225 60" Capillary, Auto Reset, P/N 210855 (240°F), green

250-400 60" Capillary, Auto Reset, P/N 211066 (300°F), red

PEH/REH All P/N 254754, Auto Reset, 3/4" disc None

MAPS III

RDCB, RDDB

Gas Heat

Section

100 P/N 258855 (240°F), 22" capillary, auto, white

None

150-800 P/N 148588, 60" Capillary, Auto Reset, (270°F)

1000-1600

P/N 148588, 60" Capillary, Auto Reset, (270°F)

P/N 82414, ECO, 306°F

Summary of content (8 pages)

PAGE 1
P-FAN&LIMIT (Version B) � Obsoletes Form P-FAN&LIMIT (Version A) IMPORTANT 1. Always include complete heater model and serial number so that any specification change can be considered for parts shipment. It can save time and expense. 2. Check temperature setting on control being replaced. 3. We reserve the right to substitute functional replacements. 4. Specifications are subject to change without notice.
PAGE 2
SECTION 1 (cont'd) TABLE 1 (cont'd) Functional Replacement Fan/ Blower AND/OR Limit Controls by Heater Model Group listed alphabetically (applies to currently manufactured units) Footnotes for TABLE 1 (cont'd): IMPORTANT: Always verify temperature setting of the original control. C D E F P/N 209184 is a relay kit to replace discontinued fan control P/N 10357. Kit includes instructions.
PAGE 3
SECTION 2A TABLE 2: Functional Replacement Fan/Blower and/or Limit Controls by Heater Model - Applies to: NO-LONGER-MANUFACTURED UNITS listed alphabetically by Model group) - See NOTES page 5. IMPORTANT: Depending on usage and availability, replacement parts listed in TABLE 2 may not be available. If part is no longer available from the manufacturer and/or no longer used for current Reznor product, replacement part will not be available when inventory as of 2/2010 is depleted.
PAGE 4
SECTION 2A (cont'd) TABLE 2 (cont'd) - Functional Replacement Fan/Blower and/or Limit Controls by Heater Model (applies to NO-LONGER-MANUFACTURED UNITS listed alphabetically by Model group) Model OUH, OUB, OUE, ROUE (C)-PAK, RPAK, RPVAK Series 6 Size 95, 140, 185, 200 1 Fan Control Replaces Limit Control Combination Fan & Limit, M/H #L4064-1592-4, P/N 36559 50417 (125°F), auto, white E 50417 (125°F), auto, white F 57953 (170°F), auto, green C 209184 10357 E 50417 (125°F), auto, white F 19080 (155°F), au
PAGE 5
Model (H), (C), (HC) - X, XE prior to Series 6 XA, XB, XC, XD, XJ, XR XL CXL XLB CXLB CXL XLB CXLB XLB, CXLB XLB, CXLB XLB, CXLB ECO Limit Control for XL, CXL, XLB, CXLB - Starting 4/83 (Serial No.
PAGE 6
SECTION 2B Installing Replacement Fan Control on Models (C)XL, (C)EEXL, (C)XLB, and (C)EEXLB 1. Turn off the gas and the electric. 2. Disconnect and remove the defective fan control. If the fan control is on a spring-loaded bracket as illustrated in the photos, remove the entire bracket assembly. Earlier models have the fan control seated directly on the heat exchanger base; remove the fan control only. 3. Refer to the instructions and illustration below that apply to the Size of heater being serviced.
PAGE 7
SECTION 2C Functional Replacement for Discontinued Fan Control, Relay Kit P/N 63254 A fan relay kit (P/N 63254) may be used to replace the discontinued fan control on Models LUS/F, FM, and AFA units equipped with 24 volt controls. This fan relay kit may also be used, if desired, on Models XA, XB, XL, XLB.