Installation - Blower/Filter Cabinet Owner's manual

ManualsBrandsReznor ManualsRadiatorsB Option

Form I-B-BF, P/N 99714 (Rev 2), Page 1

INSTALLATION FORM RZ-NA I-B-BF

Obsoletes Form RGM 434/436-BF-A

OPTIONS CW1, CW2, CW3

BLOWER/FILTER CABINET

APPLIES TO: Model B

Option Description

HAZARD INTENSITY LEVELS

1. DANGER: Failure to comply will result in severe personal

injury or death and/or property damage.

2. WARNING: Failure to comply could result in severe per-

sonal injury or death and/or property damage.

3. CAUTION: Failure to comply could result in minor personal

injury and/or property damage.

Duct Opening Dimensions

The blower/filter cabinet option is designed for field assembly and must be installed on the heater prior

to heater installation. Option CW1 includes filter racks that are adaptable for 1" or 2" filters but does not

include the filters. Option CW2 includes 1" permanent aluminium filters. Option CW3 incudes 2"

permanent filters.

Check the parts in the option package with the following list. SAVE THE CARDBOARD PACKING

INSERTS; they will be used for supports during installation.

The option 25-50 75 100 125 130 165 200 250-300 400

package includes:

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Option CW1- Pkg P/N

101543 101544 101545 140836 101546 101547 101548 101549 101550

Option CW2- Pkg P/N

101628 101629 101630 140884 101631 101632 101633 101634 101635

Option CW3- Pkg P/N

101636 101637 101638 140885 101639 101640 101641 101642 101643

Top and Bottom Panels

2 99707 2 99707 2 99707 2 140841 2 100642 2 100642 2 100642 -- --

Top Right & Btm Left

-- -- -- -- -- -- -- 2 101582 2 101584

Top Left and Btm Right

-- -- -- -- -- -- -- 2 101583 2 101585

Stiffening Channel

-- -- -- -- -- -- -- 2 101551 2 101551

Stiffening Angle

-- -- -- -- -- -- -- 2 101601 2 101601

Right Side Hanger Bar

1 101578 1 101578 1 101578 1 101578 1 101580 1 101580 1 101580 1 101580 1 101580

Left Side Hanger Bar

1 101579 1 101579 1 101579 1 101579 1 101581 1 101581 1 101581 1 101581 1 101581

Front Legs

2 99761 2 99762 2 99763 2 137404 2 100634 2 100635 2 100636 2 100637 2 100638

Top Filler Panel Assy

1 101562 1 101563 1 101564 1 140838 1 101565 1 101566 1 101567 1 101568 1 101569

Bttm Filler Panel Assy

1 101570 1 101571 1 101572 1 140840 1 101573 1 101574 1 101575 1 101576 1 101577

Rear Legs

2 99708 2 99708 2 99708 2 99708 2 100639 2 100639 2 100639 2 100640 2 100641

Door Panels

2 99712 2 99712 2 99712 2 99712 2 100646 2 100646 2 100646 2 100646 2 100646

Door Stops

2 99711 2 99711 2 99711 2 99711 2 100645 2 100645 2 100645 2 100645 2 100645

Center Fltr Brkt Assy

-- -- -- -- 1 101624 1 101624 1 101624 1 101625 1 101626

Filter Angle

2 99710 2 99710 2 99710 2 99710 4 101591 4 101591 4 101591 4 101592 4 101593

Filter Bracket

2 99709 2 99709 2 99709 2 99709 2 101595 2 101595 2 101595 2 101596 2 101597

Parts Bag (see below)

1 101600 1 101600 1 101600 1 101600 1 101600 1 101600 1 101600 1 101600 1 101600

Permanent Aluminum Filters in Option Package CW2 only

16" x 20" x 1" -- -- -- -- -- -- -- 2 101607 --

20" x 20" x 1" 1 101608 1 101608 1 101608 1 101608 -- -- -- 2 101608 --

16" x 25" x 1" -- -- -- -- 1 101609 1 101609 1 101609 -- 2 101609

20" x 25" x 1" -- -- -- -- 1 101610 1 101610 1 101610 -- 2 101610

Permanent Aluminum Filters in Option Package CW3 only

16" x 20" x 2" -- -- -- -- -- -- -- 2 101620 --

20" x 20" x 2" 1 101621 1 101621 1 101621 1 101621 -- -- -- 2 101621 --

16" x 25" x 2" -- -- -- -- 1 101622 1 101622 1 101622 -- 2 101622

20" x 25" x 2" -- -- -- -- 1 101623 1 101623 1 101623 -- 2 101623

Parts Bag (P/N 101600) includes:

Qty P/N Description

118 11813 #10 x 1/2" lg Sheet Metal Screws

14 16246 #1/4 - 20 x 3/4" lg Hex Head Cap Screws

6 7328 #1/4 - 20 Hex Nuts (Keps)

1 101599 Foam Rubber Gasket (1/8"x3/4"x20"lg)

4 82177 Plastic Plug, Niagara Plastics #412-2

Dimensions of Cabinet Opening for Return Air Duct

Heater Duct Opening (inches)

Size Width Height

25-125 14-3/4 15-7/8

130-200 20-1/2 23-7/8

250-300 26 23-7/8

400 34-1/4 23-7/8

Application NOTE: Cabinet

also fits no longer manufactured

Reznor Model BE.

Summary of content (4 pages)

PAGE 1
HAZARD INTENSITY LEVELS OPTIONS CW1, CW2, CW3 BLOWER/FILTER CABINET 1. DANGER: Failure to comply will result in severe personal injury or death and/or property damage. 2. WARNING: Failure to comply could result in severe personal injury or death and/or property damage. 3. CAUTION: Failure to comply could result in minor personal injury and/or property damage.
PAGE 2
WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. INSTALLATION INSTRUCTIONS Installation should be done by a qualified agency in accordance with the instructions on this sheet and in compliance with all codes and requirements of authorities having jurisdiction.
PAGE 3
INSTALLATION NOTE: For reasons of clarity, the illustrations in FIGURES 6-11 show only the filter brackets (not the assembled channels). 6. Assemble the Cabinet Bottom (See FIGURE 6) Sizes 25-200 - On the inside of the cabinet bottom, attach the door stops and the bottom filter bracket. See (a) and (b) below. Insert the screws so that the ends will be inside the cabinet. (a) Attach the door stops along the side edges.
PAGE 4
FIGURE 9 - Install (1) Assembled Cabinet Bottom, (2) Rear Legs, and (3) Assembled Cabinet Top Note: Use cardboard inserts shown in FIGURE 8 to support rear corners. FIGURE 11 Sizes 130-400 Require Center Filter Channels Attach Center Filter Bracket Assembly Across Rear Cabinet Opening Set the cabinet top assembly over the rear legs and lower it onto the front legs. Attach the top to the front legs, the top filler panel, and the rear legs. Slide the filters into the channels on the filter brackets.