Installation - Polytube Adapter - Suspended Unit

ManualsBrandsReznor ManualsRadiatorsBE Option

Form I-B-PS, Mfg #101500 Rev 4, Page 1

HAZARD INTENSITY LEVELS

1. DANGER: Failure to comply will result in severe personal

injury or death and/or property damage.

2. WARNING: Failure to comply could result in severe per-

sonal injury or death and/or property damage.

3. CAUTION: Failure to comply could result in minor per-

sonal injury and/or property damage.

INSTALLATION FORM RZ-NA I-B-PS

Obsoletes Form RGM 434/436-PS (Version A.3)

APPLIES TO: Models B and BE

OPTIONS CD6 and CD11

Polytube Adapters for

Suspended Blower-

Type Unit Heaters

Option CD6 - The polytube adapter in Option CD6 is designed to ei-

ther raise the adapter discharge panel above the heater discharge or

lower it below, depending upon how the adapter is assembled.

Option CD11 - The polytube adapter in Option CD11 is designed so

that the polytube adapter discharge panel is directly in line with the

heater discharge.

By offering these three installation designs the option is adaptable to a

variety of types of building structure. Follow the instructions in this

sheet that apply to your installation.

OPTION DESCRIPTION AND APPLICATION

The optional polytube adapter is designed to adapt blower type unit

heaters (Models B/BE 75-400) for use with polytube ductwork. The

adapter is installed on the front of the heater and is equipped with a

collar for attaching the field-supplied polytube.

The most common application of polytube ductwork for distribution

of tempered air is in greenhouses. Polytubes are also used in industrial

buildings to improve operating efficiency by recovering stratified air

and reducing the need for complete area heating.

Figure 1 - Polytube

Adapter Parts in

Option CD6 and

Option CD11

Dimensions

on page 2

Installation

Instructions

on pages 3

and 4

The option 75 100 125 130 165 200 250-300 400

packages include:

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Qty

P/N

Option CD6 - Pkg P/N 101243 101244 137299 122086 101245 101246 101247 101248

Adapter Side 1 101253 1 101253 1 132066 1 101254 1 101254 1 101254 1 101255 1 101254

Adapter Side 1 101259 1 101259 1 132066 1 101260 1 101260 1 101260 1 101255 1 101260

Adapter Top 1 101266 1 101267 1 132061 1 121548 1 101268 1 101269 1 101270 1 101271

Adapter Bottom 1 101272 1 101273 1 132062 1 121547 1 101274 1 101275 1 101276 1 101277

Discharge Panel Assy 1 101249 1 101249 1 101249 1 101250 1 101250 1 101250 1 101250 1 101250

Discharge Collar Band 1 101499 1 101499 1 101163 1 146463 1 146463 1 146463 1 146463 1 146463

1/4-20x1-1/2 Hex Head Screw 1 51231 1 51231 1 51231 1 51231 1 51231 1 51231 1 51231 1 51231

1/4-20 Hex Nut 1 7328 1 7328 1 7328 1 7328 1 7328 1 7328 1 7328 1 7328

1/4-20 Wing Nut 1 107246 1 107246 1 107246 1 107246 1 107246 1 107246 1 107246 1 107246

Label 1 101263 1 101263 1 101263 1 101263 1 101263 1 101263 1 101263 1 101263

Screws, #10 x 1/2" long 38 11813 38 11813 38 11813 38 11813 38 11813 38 11813 38 11813 38 11813

Option CD11 - Pkg P/N 104227 104228 137301 122087 104229 104230 104231 104232

Adapter Side 2 104233 2 104233 2 132194 2 104234 2 104234 2 104234 2 104235 2 104234

Adapter Top 1 104236 1 104237 1 132063 1 121546 1 104238 1 104239 1 104240 1 104241

Adapter Bottom 1 104242 1 104243 1 132064 1 121546 1 104244 1 104245 1 104246 1 104247

Discharge Panel Assy 1 101249 1 101249 1

101249

1 101250 1 101250 1 101250 1 101250 1 101250

Discharge Collar Band 1 101499 1 101499 1 101499 1 146463 1 146463 1 146463 1 146463 1 146463

1/4-20x1-1/2 Hex Head Screw 1 51231 1 51231 1 51231 1 51231 1 51231 1 51231 1 51231 1 51231

1/4-20 Hex Nut 1 7328 1 7328 1 7328 1 7328 1 7328 1 7328 1 7328 1 7328

1/4-20 Wing Nut 1 107246 1 107246 1 107246 1 107246 1 107246 1 107246 1 107246 1 107246

Label 1 101263 1 101263 1 11813 1 101263 1 101263 1 101263 1 101263 1 101263

Screws, #10 x 1/2" long 38 11813 38 11813 38 96426 38 11813 38 11813 38 11813 38 11813 38 11813

Summary of content (4 pages)

PAGE 1
HAZARD INTENSITY LEVELS OPTIONS CD6 and CD11 Polytube Adapters for Suspended BlowerType Unit Heaters 1. DANGER: Failure to comply will result in severe personal injury or death and/or property damage. 2. WARNING: Failure to comply could result in severe personal injury or death and/or property damage. 3. CAUTION: Failure to comply could result in minor personal injury and/or property damage. INSTALLATION FORM RZ-NA I-B-PS Obsoletes Form RGM 434/436-PS (Version A.
PAGE 2
DIMENSIONS OF POLYTUBE ADAPTERS -- Option CD6 and CD11 Figure 2 - Side View of Heater and Polytube Adapter, Option CD6, with Adapter Outlet Below the Heater Discharge Figure 3 - Side View of Heater and Polytube Adapter, Option CD6, with Adapter Outlet Above the Heater Discharge Figure 4 - Side View of Heater and Polytube Adapter, Option CD11 Form I-B-PS, Page 2 Heater Size 75 100 125 130 165 200 250/300 400 Option CD6 with Discharge Below Heater Discharge A B C 16-7/32 30-7/32 10-3/8 16-13/32 30-7/32 1
PAGE 3
WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, injury or death. Read the installation, operation, and maintenance instructions thoroughly before installing or servicing this equipment. INSTALLATION INSTRUCTIONS Installation should be done by a qualified agency in accordance with the instructions on this sheet and in compliance with all codes and requirements of authorities having jurisdiction.
PAGE 4
INSTALLATION INSTRUCTIONS (cont'd) 5. Install Discharge Panel (See Figure 8) Slide the discharge panel over the front of the "box" formed by the sides, top, and bottom adapter panels. Attach at all of the holes across the top, bottom and sides. 6. Attach Label For future reference, attach the "Polytube Holes Location" label on the side panel of the adapter. (See recommended location in Figures 2, 3, and 4 on page 2.) Wipe the surface of the panel with a clean dry cloth.