Submittal

6
Application
Features
Text - Text
Comments
For commercial and industrial use
Model EGHB is designed for areas requiring a high level of air
flow. This unit heater may be mounted horizontally (wall or ceil-
ing) using supplied brackets or vertically using 4 threaded rods
(not included).
A variety of control options are available in kits or may be facto-
ry installed.
EGHB
showroom warehouse stairwell factory
Heavy Duty, Suspended,
Electric Unit Heater
Color
- Standard: almond.
Finish
- Standard: epoxy/polyester powder
paint.
Voltage
- 208V, 240V, 277V, 347V, 480V, 600V,
1 or 3-phase.
- Some units may be converted from
3 to 1-phase.
Construction
- 18 and 20-gauge steel.
- Adjustable louvers to direct air flow.
- High-limit temperature control with
automatic reset.
Fan
- Motor mounted in cold compartment.
- Thermally-protected motor.
- Totally enclosed and factory-lubricated
ball bearing motor
(except for 15 to 25 kW at
208V/240V).
- 58 dBA fan (2-10 kW), 67 dBA fan
(15-30 kW)
and 77 dBA fan (40-60 kW).
- Fan delay purges heater of residual
heat.
(Any remote thermostat or relay must
be connected to the heater control
terminal block.)
Heating element
- Durable tubular heating elements;
stainless steel (2-10 kW);
finned (15-60 kW).
- Concentric disposition of heating
elements.
Control
- All models have a factory-installed
contactor.
- 208V/240V control circuit standard
(with transformer if necessary).
- 24V relay, with or without transformer
available.
- Built-in thermostat available.
- 120V control circuit available.
For greater comfort, it is highly
recommen ded that a wall mounted
thermostat be used.
Installation
- Horizontal wall or ceiling mounting
using 1 of 2 supplied brackets which
allow 360° rotation*.
- Vertical mounting using 4 threaded
rods
1/2 in. X 13 UNC (not included).
- Diffuser cones available.
- Large and easily accessible control
compartment.
- Maximum recommended height
(horizontal):
2-10 kW: 8 ft. (2.4 m);
15-30 kW: 10 ft. (3 m);
40-60 kW: 15 ft. (4.5 m).
- Protective screen allows lower
mounting height
(except 40-60 kW).
- Minimum height of 8 ft. (2.4 m) for
40-60 kW heaters.
- 85 °F maximum operating temperature.
Warranty
- 1-year warranty against defects.
*Horizontal mounting only for 40, 50 and 60kw secured by 4 hooks (ceiling only).
Features