Electric Heat Brochure

Page 16
1
Standard voltage is 208V/240V unless otherwise noted.
2
Do not install a built-in thermostat with these options.
3
For the U.S. only: The nominal current of the unit must not exceed 80% of the capacity of the disconnect.
4
CL1A thermostat requires BT1 option.
5
IR24: 24V signal by others (multiple units per thermostat). IR2B: for 24V thermostat on each unit.
6
All heaters have 240V control circuit.
7
For mounting heater on glass wall. Configuration HG3, HG4, HG6, & HG8 only.
Optional colors shown in the color chart section are available upon request.
EMC
Size234568101215182024
Wall Mounted
Thermostats
Single-pole, low-voltage thermostat
4
CL1A
Single-pole, single stage thermostat
CL5
24V Relay Kit
5
Without transformer
IR24
24V relay with transformer
6
IR2B
Filters (Wall Mounted Units Only)
Standard
HZ3
Washable
HX4
Sub-Base
2" sub-base for wall mount
HY7
Color Matched
Trim Options
Recessed trim kit
Smooth finish back plate
7