Electric Heat Brochure

Page 19
Commercial Wall Heater
Color
• Standard: white, almond.
• Optional: metallic silver, bronze, metallic charcoal,
aluminum, semi-gloss black (10% up-charge).
• Custom colors available upon request.
Finish
• Standard: epoxy/polyester powder paint.
Voltage
• 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1 or 3-phase.
Construction
• 18-gauge steel front cover. 1
• Bottom air outlet.
• High-limit temperature control with automatic reset.
Fan
• Closed, factory-lubricated motor. 2
• 160 cfm fan (single unit: 55 dBA); 2 X 160 cfm fan (double unit: 58
dBA);
3 X 160 cfm fan (triple unit: 61 dBA).
• Fan delay purges heater of residual heat.
Heating element
• Durable tubular heating element with fins. 3
Control
• Built-in thermostat included with control knob or tamper proof. 4
• 24V relay, with or without transformer available.
Note: Thermostat is not included in heater with factory installed relay.
Any remote thermostat or relay must be connected to the heater
control terminal block.
Installation
• Minimum clearance from the floor and adjacent walls: 10 in. (25.4
cm).
• Adaptor for surface mounting available. 5
• Up to three units can be installed side-by-side
Warranty
• 1-year warranty against defects.
Application
• Apartment building, commercial building, entrance way,
stairwell, garage.
Features
12345
With
surface
mounting
box
Recessed
KOE Ø22 mm
KOE Ø
7/8"
KOE Ø22 mm
KOE Ø
7/8"
368 mm
14
7/16"
51 mm
2"
212 mm
8
5/16"
74 mm
2
7/8"
55 mm
2
3/16"
34 mm
1
5/16"
506 mm
19
7/8"
34 mm
1
5/16"
51 mm
2"
51 mm
2"
Installation
(All Models)
Side View (All Models)
Surface
Recessed
Front View
Front View Front View
Side View
Top View Top View
Top View
Required Wall
Depth Opening
Single Unit
104 mm
4
1/8"
410 mm
16 1/8"
810 mm
31
7/8"
767 mm
30
3/16"
1227 mm
48
5/16"
1185 mm
46
5/8"
561 mm
22
1/16"
33 mm
1
5/16"
104 mm
4
1/8"
561 mm
22
1/16"
Double Unit Triple Unit
EHC