Electric Heat Brochure
Page 23
Electric Baseboard Heater
Features
Color
• Standard: Semi-gloss powdered paint finish in white, almond
optional.
• Optional Special Stock Finishes: See special color chart for
available finishes.
Finish
• Standard: 4H pencil hardness epoxy/polyester powder coat paint.
• May be repainted with any interior paint.
Voltage
• 120V, 208V, 240/208V, 277V, 347V, 480V, 600V, 1-phase.
Construction
• Robust 22-gauge tight fit body.
• Sturdy 20-gauge front panel with design embossed lines.
• Welded 20-gauge junction box to back wrap, easy rear access
wiring panel.
• Rounded upper corners and junction box sides.
• Linear high-limit temperature control with automatic reset.
• High altitude version available (-HA) up to 8200 ft.
Heating element
• Stainless steel tubular heating element with aluminum fins.
• Floating stainless steel heating element on high-temperature
nylon bushings eliminating expansion noises.
• Aluminum diamond shape element fins position for maximized
heat transfer.
• Element locked in place by screw on a stainless steel support.
Dimension
• See Table.
• Small height and slim depth for economy of space.
• Standard watt density and low watt density models.
Control
• A wide selection of built-in controls available.
• Built-in thermostat kit can be installed at either end.
• Built-in relay kit fits in the right end box only.
• A compartment for low voltage connections (located directly under
the junction box) facilitates the installation of low voltage relay
in electric baseboard.
Manufacturer highly recommends using an electronic wall thermostat
for greater comfort and efficiency.
Installation
• No disassembly installation with single-screw built-in rear entry
wire holder.
• Installation directly on the floor with connection box at both ends
of the heater.
• Two rows of oblong mounting holes with center mark for ease
of installation.
• Raceway and side knock-outs for baseboard interconnections.
Warranty
• 1-year warranty against defects.
• Heating element has a lifetime warranty for the initial end user.
Note: Stainless steel tubular heating element on all sizes eliminates
potential for 60 Hz hum. Locked-in-place element, mounting slot
holes and overall construction maximizes performance, quality and
more.
Application
• Residential and light commercial applications. Living areas,
bedrooms, etc.
148 mm
5
13/16
"
KOE Ø22 mm
KOE Ø
7/8
"
64.5 mm
2 9/16"
62 mm
2
7/16
"
75 mm
2
15/16
"
34 mm
1
3/8
"
KOE Ø6.4 mm
KOE Ø
1/4
"
KOE Ø22 mm
KOE Ø
7/8
"
25.4 mm
1"
25.1 mm
1"
25.4 mm
1"
75 mm
2 15/16"
89.5 mm
3
1/2
"
89.5 mm
3
1/2
"
72.8 mm
2
7/8
"
KOE Ø22 mm
KOE Ø
7/8
"
16.8 mm
11/16
"
89.5 mm
3
1/2
"
89.5 mm
3
1/2
"
Rear View Bottom ViewSide View
EBHB