Electric Heat Brochure

Page 3
Industrial Suspended
Unit Heater
Color
• Standard: almond.
Finish
Standard: epoxy/polyester powder paint.
Voltage
208V, 240V, 277V, 347V, 480V, 600V, 1 or 3-phase.
Some units may be field converted from 3 to 1-phase.
Construction
18 and 20-gauge steel.
Adjustable louvres to direct air flow.
High-limit temperature control with automatic reset.
Fan
Motor mounted in cold compartment.
• Thermally-protected motor.
Totally enclosed and factory-lubricated ball bearing motor
(except for 15 to 25kW at 208/240V).
58 dBA fan (2 to 10kW), 67 dBA fan (15 to 30kW)
and 77 dBA fan (40 to 60kW).
Fan delay purges heater of residual heat.
Heating element
Durable tubular heating elements; stainless steel (2 to 10kW);
finned (15 to 60kW).
Concentric disposition of heating elements.
Factory sealed element upon request.
Control
All models have a factory-installed contactor.
240/208V control circuit standard (with transformer if necessary).
24V relay, with or without transformer available.
Built-in thermostat available.
120V control circuit available.
Manufacturer highly recommends to use a wall thermostat for
greater comfort.
Any remote thermostat or relay must be connected to the heater
control
terminal block.
Installation
Horizontal wall or ceiling mounting using one of two supplied
brackets which allow 360° rotation.
(Horizontal mounting only for 40kW, 50kW and 60kW secured by 4
hooks [ceiling only].)
Vertical mounting using 4 threaded rods 1/2 in. X 13 UNC (not
included) (except option -MD).
Diffuser cones available (except option -MD).
Large and easily accessible control compartment.
Maximum recommended height (horizontal): 2 to 10kW: 8 ft. (2.4
m); 15 to 30kW: 10 ft. (3 m); 40 to 60kW: 15 ft. (4.5 m).
Protective screen allows lower mounting height (except 40 to
60kW).
Minimum height of 8 ft. (2.4 m) for 40 to 60kW heaters.
30 °C (85 °F) maximum operating ambient temperature.
Warranty
1-year warranty against defects.
Application
Commercial hall, warehouse, stairwell, factory.
Features
Horizontal mounting
Vertical mounting
with diffuser cone
EGHB