Submittal

24
Cut down on cold drafts
Model EHC heater provides a burst of heat in areas affected by
cold drafts. Designed for residential, commercial and industrial
use, the unit can be recessed or surface-mounted.
Powered by a closed factory-lubricated motor, the fan blows
warm air downward to create air circulation.
EHC
Commercial, WallMounted,
Electric Heater
S
tandard
O
ptional
garage apartment building commercial building entrance way stairwell
Features
Color
- Standard: white.
- Optional: almond.
- Custom colors available upon request.
Finish
- Standard: epoxy/polyester powder paint.
Voltage
- 208V, 240V/208V, 277V, 347V, 480V, 600V, 1 or
3-phase.
Construction
- 18-gauge steel front cover.
- Bottom air outlet.
- High-limit temperature control with automatic reset.
Fan
- Closed, factory-lubricated motor.
- 160 cfm fan (1.5 to 4.8 kW; 55 dBA); 2 X 160 cfm fan
(6 to 8 kW; 58 dBA); 3 X 160 cfm fan (12 kW; 61 dBA).
- Fan delay purges heater of residual heat.
(Any remote thermostat or relay must be connected
to the heater control terminal block.)
Heating element
- Durable tubular heating element with fins.
Control
- Built-in thermostat with control knob or tamper-
proof adjustable with a screwdriver included.
Installation
- Adaptor for surface mounting available.
- Minimum clearance from the floor and adjacent
walls: 10 in. (25.4 cm).
Warranty
- 1-year warranty against defects.
RecessedMounted