Submittal

13
The perfect heater for corrosive environments
The EWHB model washable unit heater is intended for use where
large quan tities of water are present or humidity levels are very
high. The heater is specifically designed for environments where
heating units may require flushing with water in the course of
non-hazardous activities.
The non-metallic electrical casing and the stainless steel hous-
ing are completely resistant to moisture and corrosion.
EWHB
Wash Down Unit Heater
marine and offshore water treatment plant dairy food industry car wash
Features
Voltage
- 208V, 240V, 480V, 600V, 1 or 3-phase.
Construction
- 16-gauge, stainless steel, moisture and corrosion
resistant housing.
- Adjustable, stainless steel outlet louvres.
- Stainless steel rear grille to protect against
accidental contact with the fan blade.
- High-limit temperature control with automatic reset
(manual reset available upon request).
- Nema 4X non-metallic electrical enclosure.
- Pilot light (power-on indicator) available.
- Disconnect switch (40A max.) available.
Fan
- Anodized aluminum, delayed-action fan.
- Enclosed motor with permanently lubricated
ball bearing for longer life.
- Epoxy-painted fan.
Heating element
- Sealed tubular heating element with stainless steel fins.
Control
- 24V control circuit with transformer and contactor.
- Built-in capillary thermostat available.
- Fan switch control available.
Installation
- Electrical enclosure located at bottom of unit for
ease of installation and servicing.
- Stainless steel swivel mounting bracket included,
for wall or ceiling mounting.
Warranty
- 1-year warranty against defects.