Installation Manual
3
IMPORTANT SAFETY INFORMATION
Please read all instructions before servicing this equipment.
Pay attention to all safety warnings and any other special
notes highlighted in the manual. Safety markings are used
frequently throughout this manual to designate a degree
or level of seriousness and should not be ignored.
WARNING indicates a potentially hazardous situation
that if not avoided, could result in personal injury or death.
CAUTION indicates a potentially hazardous situation that
if not avoided, may result in minor or moderate injury or
property damage.
ATTENTION INSTALLERS: It is your responsibility to
know this product better than your customer. This includes
being able to install the product according to strict safety
guidelines and instructing the customer on how to operate
and maintain the equipment for the life of the product.
Safety should always be the deciding factor when installing
this product and using common sense plays an important
role as well. Pay attention to all safety warnings and any
other special notes highlighted in the manual. Improper
installation of the unit or failure to follow safety warnings
could result in serious injury, death, or property damage.
These instructions are primarily intended to assist qualified
individuals experienced in the proper installation of this
appliance. Local codes may require licensed installation/
service personnel for this type of equipment. After
completing the installation, return these instructions to
the customer’s package for future reference.
WARNING:
Improper installation, service, adjustment,
or maintenance may cause explosion, re,
electricalshockorotherhazardousconditions
whichmayresultinpersonalinjuryorproperty
damage. Unless otherwise noted in these
instructions, only factory authorized kits or
accessoriesmaybeusedwiththisproduct.
WARNING:
Donotplacecombustiblematerialonoragainst
the unit cabinet. Do not place combustible
materials, including gasoline and any other
ammablevaporsandliquids,in thevicinity
oftheunit.
WARNING:
PROPOSITION 65 WARNING: This product
contains berglass wool, a product known
to the state of California to cause cancer.
Disturbingtheinsulationofthisproductduring
installation,maintenance,orrepairwillexpose
youtoberglasswool.
• Breathingthismaterialmaycauserespiratory
irritationsormaycauselungcancer.
•Fiberglass wool may also cause eye
irritation,skinsensitization,orotherallergic
responsesinsusceptibleindividuals.
• Always wear goggles, disposable gloves,
longsleevedshirt,andappropriatebreathing
protectionwhenworkingnearthisinsulation.
Ifcontactwithskinoccurs,washimmediately
withsoapandwater.Incaseofcontactwith
eyes, ush immediately with water for at
least15minutes.Contactaphysicianifneeded.
WARNING:
The information listed below and must be
followed during the installation, service,
and operation of this unit. Unqualified
individualsshouldnotattempttointerpretthese
instructionsorinstallthisequipment.Failure
tofollowsafetyrecommendationscouldresult
inpossibledamagetotheequipment,serious
per
sonalinjuryordeath
.
• Thisequipmentcontainsliquidandgaseousrefrigerant
under high pressure. Installation or servicing should only
be performed by qualified trained personnel thoroughly
familiar with this type equipment.
• Before beginning the installation, verify that the unit
model is correct for the job. The unit model number
is printed on the data label. Follow all precautions in
the literature, on tags, and on labels provided with
the equipment. Read and thoroughly understand
the instructions provided with the equipment prior to
performing the installation and operational checkout
of the equipment.
• Never test for gas leaks with an open ame. Use a
commercially available soap solution to check all
connections See page 11.
• Follow all precautions in the literature, on tags, and
on labels provided with the equipment. Read and
thoroughly understand the instructions provided with
the equipment prior to performing the installation and
operational checkout of the equipment.
• Thisunitisdesignedonlyforoutdoorinstallationsand
should be located with consideration of minimizing the
length of the supply and return ducts. Consideration