Parts Manuals
PN 272513R11, Page 2
Replacement Parts - High-Intensity Infrared Models RIH/RIHV
65
66
65
CODE P/N Description CODE P/N Description
60
271822
Main Gas Valve (120V) - VR4205M1324
(natural & propane)
66
Conduit, 3/8" Greeneld with Anti-Short Bushings
271823
Replacement Valve Kit - order to replace
previously used valve 1/2 0002-42-
01536C01 A284, P/N 112044
112047
for RIHN30, RIHN60, RIHL50, #3802-95-
300-01
61 96010
Ignition Detection Control Replacement Kit,
#0001-22-046
112048
for RIHVN 100, RIHVL90, #3802-95-300-
02
62 96011 Wire Harness, #132084, Pkg R10 112049
for RIHVN 150, RIHVL 120, #3802-95-
300-03
63 112045
Ignition Detection Control Mounting
Bracket, #000K-1-016
112050
for RIHVN 160, RIHVN 200, #3802-95-
300-04
64 112046 Ignitor, #0002-42-110 67 96016
Air Flow Switch, #132081-2N, Pkg R15
(Not Shown)
65 112051
Angle Connector for 3/8" Greeneld,
#3802-95-302
Controls - All RIH/RIHV High-Intensity Infrared Models
Replacement Accessories
Thermostat (Option Cl34),
P/N 110252
115/24 Volt; 50-90°F Range;
nap Action Switch; Vertical
Mounting; Mfr #132026-1
Description Same as P/N
Chain - 50', 200 lb w/14 "S" Hooks Opt UE-1 95995
Chain Hanging Kit (See illustration.) Opt UE-2 110253
Stainless Flex Connector, 24", 7/8" OD
w/1/2 gas cock w/pressure tap
Option
UF-2
96000
Single-Stage Thermostat (shown below) Opt CL34 110252
Chain Hanging Kit, P/N 110253
Instructions:
1) Hang full length chain at desired height
and attach heater (C) with S-hooks.
2) Attach one end of the 11-inch length
chain with S-hooks to front of heater
(D).
3) Place other end of chain with
S-hook in hook (B) on the full
length chain.
4) Change degree of angle by
moving “S” hook at point B.
5) Check to be sure unit is level.
Crimp all “S” hooks closed.