UBX Submittal

ManualsBrandsReznor ManualsHeatingUBX Power Vented Gas Fired Unit Heater, High Static Blower Fan, LP, Aluminized Heat Exchanger - 105,000 BTU

TECHNICAL

SPECIFICATIONS

• Certiﬁed for commercial/industrial heating application

• 45-75°F Rise range - Sizes 30-350

• 50-80°F Rise range - Size 400

• Integrated circuit board with 7 segment display

• External status indicating LED

• Hinged Door with ¼ turn latch

• Improved cabinet design with removeable front face and two

tone white and black powder paint.

• Tcore2 titanium stabilized aluminized steel heat exchanger

• Patented single burner combustion system including a one-

piece burner assembly

• 115V, 1 phase, 60 Hz Supply voltage

• 115 Volt open drip proof blower motor with internal overload

protection - Sizes 30-125

• 115 Volt open drip proof blower motor with internal

overloads and deﬁnite purpose motor contactor - Sizes

150-400

• Direct drive blower with multispeed taps - Sizes 30-125

• Adjustable belt drive blower - Sizes 150-400

• Transformer for 24-volt controls

• Integrated circuit board with diagnostic indicator lights

• Multi-try direct spark ignition with timed lockout

• Blower relay (included on the circuit board)

• Single-stage natural gas valve (ﬁeld adjustable for operation

to 9,000 ft. elevation)*

• Vibration/noise isolated fan and venter motors ~ designed

for low noise operation

• 4-pt Suspension ~ standard on all sizes

• External terminal strip for 24-volt wiring

• External gas pipe connection

• Single-stage propane gas valve (ﬁeld adjustable for

operation to 9,000 ft.)*

• Two-stage gas valve (sizes 60-400)

• 409 or 316 stainless steel heat exchangers

• Totally enclosed blower motor (sizes 30-400)

• Vent cap

• Thermostat

• Intergrated 30° & 60° downturn nozzles

• Integrated vertical louvers.

• Gas conversion kits (natural and propane)

• Primary/secondary controls for zoning up to six units

• Duct Flange

• Polytube adapters

• Hanger kits for 1” pipe

• Stepdown transformer (for 208/115, 230/115 or 460/115

supply voltage)

• Manual shutoff valves

UBX Series

Reznor® Model UBX gas-ﬁred unit heaters are available in 14 sizes

ranging from 30,000 to 400,000 BTUH gas input. Model UBX heaters

are approved for installation in the United States and Canada by ETL.

Each size cabinet is easily suspended from 4 suspension points. The low

voltage terminal strip on the outside of the cabinet makes connecting

control wiring easy with no panels to remove. The addition of a “G” terminal

to the strip, along with the new design of the circuit board, allows for fan

only operation (without adding relays).

Reznor model UBX unit heaters feature a two-tone black and white powder

coated, scratch-resistant paint scheme. Each unit has clean rounded

corners and edges with no visible screws or fasteners. Model UBX unit

heaters provide the same superior performance customers have relied on

for more than 100 years along with added features that make servicing

the unit easier, installation safer and improve monitoring capabilities.

FEATURES and BENEFITS

OPTIONAL FEATURES

Power Vented, High Static Blower Fan

Commercial/Industrial Unit Heaters

82 - 83% Thermal Efﬁciency

*Note: Pressure switch change required for installations above 6,000 ft.

Summary of content (8 pages)

PAGE 1
TECHNICAL SPECIFICATIONS UBX Series Power Vented, High Static Blower Fan Commercial/Industrial Unit Heaters 82 - 83% Thermal Efficiency FEATURES and BENEFITS • • • • • • • • • • • • Reznor® Model UBX gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. Model UBX heaters are approved for installation in the United States and Canada by ETL. Each size cabinet is easily suspended from 4 suspension points.
PAGE 2
MODEL IDENTIFICATION CODES U B X 150 Input Heating Capacity 30 45 60 75 100 125 150 175 200 225 250 300 350 400 Unit Heater D - 82-83% Axial Fan B - 82-83% Blower Fan E - 93% Axial Fan X - Power Vented Z - Seperated Combustion TECHNICAL DATA Size Input Heating Capacity 30 45 60 75 100 125 BTUH 30,000 45,000 60,000 75,000 105,000 120,000 kw/h 8.8 13.2 17.6 22.0 30.8 35.
PAGE 3
TECHNICAL DATA (Continued) Size Input Heating Capacity 150 175 200 225 250 300 350 400 BTUH 150,000 175,000 200,000 225,000 250,000 300,000 350,000 400,000 kw/h 43.9 51.2 58.6 65.9 73.2 87.8 102.5 117.1 83 83 83 83 83 83 83 82 Thermal Efficiency (%) Output Heating Capacity C BTUH 124,500 145,250 166,000 186,750 207,500 249,000 290,500 328,000 kw/h 36.4 42.5 48.6 54.7 60.8 72.9 85.1 96.
PAGE 4
DIMENSIONS Size (in) A 30, 45 27 75 100 125 150, 175 38 3/16 225, 250 300, 350, 400 16 3/4 20 1/8 16 41 34 1/8 A B 23 C 425 100 351 629 125 F 18 11/16 G H J K L 6 15/32 40 3/32 M N P 10 6 3 1/2 Q R S T 5 31/32 3 5/16 12 8 11/16 6 5/16 25 17 3/8 1 9/16 22 1/2 5 15/32 11/16 2 21/32 17/32 3 5/16 5 29/32 48 1/8 8 15/32 24 1/16 19 5/16 15 5/16 9 9/16 47 5/8 7 15/32 30 64 3/4 31/32 22 349 686 40 37 1/32 30 41 7/32 D E 254 437 330 475 533 611 25 11/16 68 1/8
PAGE 5
THROW/FLOOR COVERAGE Height measured from the floor to the bottom of the unit heater. Point where heated air from the heater reaches the floor. Point where heated air tends to rise from the floor. Z Point where the air velocity drops below 50 feet per minute (254 mm/sec). H X Y Dimensions in Feet Low Speed Size Mounting Height 30 X Y Z 45 Lvr. Angle X Y Z 60 Lvr. Angle X Y Z 75 Lvr. Angle X Y Z 100 Lvr. Angle X Y Z 75°F Rise 150 125 Lvr. Angle X Y Z Lvr.
PAGE 6
THROW/FLOOR COVERAGE (continued) Dimensions in Feet 60°F Rise Size Mounting Height 175 X Y Z 200 Lvr. Angle X Y Z 225 Lvr. Angle X Y Z 250 Lvr. Angle X Y Z 300 Lvr. Angle X Y Z 70°F Rise 400 350 Lvr. Angle X Y Z Lvr. Angle X Y Lvr.
PAGE 7
THROW/FLOOR COVERAGE (continued) Dimensions in Meters High Speed Size Mounting Height 1.5 2.4 30 X Y Z 2.4 5.8 15.5 3 5.8 14.6 45 Lvr. Angle X Y Z 60 Lvr. Angle -20° 3.4 8.5 24.7 -11° -31° 4.6 8.8 24.1 -19° 75 X Y Z 4 9.1 32 5.2 10.1 31.4 Lvr. Angle 100 Lvr. Angle X Y Z -11° 3.7 9.1 29.6 -09° -19° 5.2 10.1 29 -16° Lvr. Angle Y Z 4 9.8 33.5 -10° 4 5.5 10.4 32.9 -17° 5.8 6.4 11.3 33.2 3 3.4 5.8 13.4 -39° 4.9 9.1 23.8 -24° 5.8 10.4 30.5 -23° 5.8 10.
PAGE 8
GENERAL INFORMATION WARNING: Gas-fired appliances are not designed for use in hazardous atmospheres containing flammable vapors or combustible dust, or atmospheres containing chlorinated or halogenated hydrocarbons. Installations in public garages or airplane hangars are permitted when in accordance with ANSI Z223.1 and NFPA 54 codes or CAN1-B149 and enforcing authorities. FOR YOUR SAFETY What to do if you smell gas: • • • • Do not try to light any appliance.