Install Instructions
Table Of Contents
- UNIT HEATER INSTALLATION/OPERATION/MAINTENANCE: (MODEL UBX: STANDARD POWER VENT BLOWER TYPE, MODEL UBZ: SEPARATED-COMBUSTION BLOWER TYPE, MODEL UDX: STANDARD POWER VENT FAN TYPE, MODEL UDZ: SEPARATED-COMBUSTION FAN TYPE)
- TABLE OF CONTENTS
- GENERAL INFORMATION
- INSTALLATION
- CONTROLS
- OPERATION
- ADJUSTMENTS
- MAINTENANCE
- Service Checklist
- Maintenance Procedures
- Burner Maintenance
- Burner Orifice Maintenance
- Heat Exchanger Maintenance
- Ignition System Maintenance
- Maintenance of Fan Motor, Fan Blades, and Fan Guard
- Venter Motor and Wheel Assembly Maintenance
- Operating Gas Valve Maintenance
- Pressure Switch Maintenance
- High Temperature Limit Control Maintenance
- Flame Rollout Switch Maintenance (Model UDZ Unit Sizes 030–125 Only)
- Interlock Door Switch Maintenance (Models UBZ and UDZ Only)
- Transformer Maintenance
- Disconnect Switch Replacement (Models UBZ and UDZ Only)
- Vent or Vent/Combustion Air System Maintenance
- TROUBLESHOOTING
- INSTALLATION RECORD (TO BE COMPLETED BY INSTALLER)
- FIGURES
- Figure 1. Heater Throw Patterns (Refer to Table 2 and Table 3)
- Figure 2. Dimensions—Models UBX and UBZ (Refer to Table 4)
- Figure 3. Dimensions—Models UDX and UDZ (Refer to Table 5)
- Figure 4. Confined Space Combustion Air Openings (Refer to Table 8)
- Figure 5. Plugging Unused Suspension Points (Models UBZ and UDZ Only)
- Figure 6. Option CK8 or CK10 Hanger Kit
- Figure 7. Option CK22 Hanger Kit
- Figure 8. Heater Suspension Using Field-Supplied Threaded Rods
- Figure 9. Gas Connections
- Figure 10. Supply Wiring Entrance and Control Connection Terminal Strip
- Figure 11. Circuit Board (DSI Control Module)
- Figure 12. Component Locations (Typical)
- Figure 13. Gas Valve ON/OFF Control
- Figure 14. Pressure Switch
- Figure 15. Gas Valves
- Figure 16. Typical Burner Assembly
- Figure 17. Ignitor Spark Gap
- Figure 18. Fan Blade Positioning and Spacing
- Figure 19. Venter Motor and Wheel Assembly
- Figure 20. Replaceable Components
- Figure 21. DSI Control Module Troubleshooting Flowchart
- TABLES
- Table 1. Related Technical Manuals Available from Factory Distributor
- Table 2. Heater Throw Distances with Standard Horizontal Louvers at Mounting Heights of 5 to 18 Feet
- Table 3. Heater Throw Distances with Standard Horizontal Louvers at Mounting Heights of 1.5 to 5.5 Meters
- Table 4. Dimensions—Models UBX and UBZ
- Table 5. Dimensions—Models UDX and UDZ
- Table 6. Clearances to Combustibles
- Table 7. Unit Weights
- Table 8. Determining Confined Space Combustion Air Requirements
- Table 9. Technical Data for UBX and UBZ Models (Unit Sizes 030–125)
- Table 10. Technical Data for UBX and UBZ Models (Unit Sizes 150–400)
- Table 11. Technical Data for UDX and UDZ Models (Unit Sizes 030–125)
- Table 12. Technical Data for UDX and UDZ Models (Unit Sizes 150–400)
- Table 13. Field-Installed Options
- Table 14. Gas Supply Line Sizes
- Table 15. Gas Connection Sizes
- Table 16. Pressure Switch Settings
- Table 17. Circuit Board (DSI Control Module) Display Codes
- Table 18. Operating Sequence (Normal Heat Cycle)
- Table 19. Operating Sequence (Abnormal Heat Cycle)
- Table 20. Fault Modes
- Table 21. Required Manifold (Outlet) Gas Pressure
- Table 22. Inputs and Capacities by Elevation in US
- Table 23. Inputs and Capacities by Elevation in Canada
- Table 24. Fan Blade Spacing
- Table 25. General Troubleshooting
15
I-UBX-UBZ-UDX-UDZ (04-21) 1034344-0
Table 12. Technical Data for UDX and UDZ Models (Unit Sizes 150–400)
Parameter
Unit of
Measurement
Unit Size
150 175 200 225 250 300 350 400
Input heating capacity
BTUh 150,000 175,000 200,000 225,000 250,000 300,000 350,000 400,000
kW 44.0 51.3 58.6 65.9 73.3 87.9 102.6 117.2
Thermal efficiency % 83 83 83 83
Output heating capacity
1
BTUh 124,500 145,250 166,000 186,750 207,500 249,000 290,500 332,000
kW 36.5 42.6 48.7 54.7 60.8 73.0 85.1 97.3
Gas connection, natural
2
Inches
1/2 1/2 3/4 3/4 3/4
Gas connection, propane
2
1/2 1/2 3/4 3/4 3/4
Vent connection diameter
3
5 5 5 6 6
Combustion air inlet diameter
(UDZ models)
3
6 6 6 6
Control amps, 24V
Amps
1.0 1.0 1.0 1.0
Full Load Amps (FLA), 115V 3.8 4.6 7.5 7.5 11.0 11.0
Maximum overcurrent protection
(115V)
4
15 15 15 20 20
Normal power consumption Watts 392 491 747 747 1086 1086
Discharge air temperature rise °F 60 60 60 60
Air volume
cfm 1921 2242 2562 2882 3202 3843 4483 5123
Meter
3
/minute 54.4 63.5 72.5 81.6 90.7 108.8 126.9 145.1
Discharge air opening area
Foot
2
2.56 2.56 3.51 3.51 4.79 4.79
Meter
2
0.24 0.24 0.33 0.33 0.45 0.45
Output velocity
fpm 752 877 1003 820 911 802 936 1069
Meter/minute 229 267 306 250 278 244 285 326
Open fan motor size
Horsepower
1/6 1/6 1/4 1/4 1/2 1/2
Enclosed fan motor size 1/4 1/4 1/4 1/2 1/2
Fan motor speed rpm 1050 1050 1050 1050
Fan diameter Inches 18 18 20 20 24 24
Sound level @ 15 feet dba 51 52 53 56 56 59 61 62
1
CSA ratings for elevations up to 2,000 feet.
2
Size shown is for gas connection to a single-stage gas valve—not supply line size.
3
Smaller and/or larger vent and combustion air pipe diameters may be permissible. Refer to appropriate venting instructions listed in Table 1.
4
MOCP = 2.25 × (largest motor FLA) + smallest motor FLA. Answer is rounded to the next lower standard circuit breaker size.