Replacement Parts
Table Of Contents
- UNIT HEATER REPLACEMENT PARTS (MODEL UBX: STANDARD POWER VENT BLOWER TYPE, MODEL UBZ: SEPARATED-COMBUSTION BLOWER TYPE, MODEL UDX: STANDARD POWER VENT FAN TYPE, AND MODEL UDZ: SEPARATED-COMBUSTION FAN TYPE)
P-UBX-UBZ-UDX-UDZ (05-21) 1034346-0
33
Hanger Kit
There are two hanger kit options (see Figure 15), one for two-point suspension (same as option CK8) and one for
four-point suspension (same as option CK10). Refer to Table 28 for hanger kit assembly components.
Figure 15. Hanger Kits
Two-Point Suspension Four-Point Suspension
Table 28. Hanger Kit Components
Option Component PN (Quantity)
CK8 (two-point)
Hanger kit package 98509 (1)
Swivel connector assembly 17627 (2)
Lockwasher, 3/8 5197 (2)
CK10 (four-point)
Hanger kit package 98511 (1)
Swivel connector assembly 17627 (4)
Lockwasher, 3/8 5197 (8)
Nut, hex, 3/8 1438 (4)
Ceiling Suspension Kit
The ceiling suspension kit (see Figure 16) is the same as option CK22. The ceiling suspension kit is used only on
unit sizes 030–125 for UDX and UDZ models (refer to Table 29).
Figure 16. Ceiling Suspension Kit
Table 29. Ceiling Suspension Kit Components
Model Unit Size Component PN (Quantity)
UDX, UDZ 030–125
Ceiling suspension kit package 1036357 (1)
Ceiling bracket*
1034211 (2)
Screw, sheet metal 195638 (1)
*Attach ceiling brackets to the top of the heater, across the front and rear. Use exiting cabinet screws and the screws from the kit.