UDZ Submittal

TECHNICAL
SPECIFICATIONS
Sizes 30-400 MBTUH certified for commercial/industrial
heating application
Sizes 30-125 MBTUH carry an additional approval for use in
residential garage/workshop heating applications
50-60°F Rise range
Integrated circuit board with 7 segment display
External status indicating LED
Hinged door with ¼ turn latch
Improved cabinet design with removeable front face and two
tone white and black powder paint.
Reznor logo embossed on bottom of unit
Tcore2 titanium stabilized aluminized steel heat exchanger
Patented single burner combustion system including a one-
piece burner assembly
Built-in disconnect switch (20A @ 115V Rating)
115V, 1 phase, 60 Hz Supply voltage
115 Volt open fan motor with internal overload protection
Transformer for 24-volt controls
Sealed control compartment houses all electrical
components
Multi-try direct spark ignition with timed lockout
Fan relay (included on the circuit board)
Single-stage natural gas valve (field adjustable for operation
to 9,000 ft. elevation)*
Vibration/noise isolated fan and venter motors ~ designed
for low noise operation
2-pt and 4-pt Suspension ~ standard on all sizes
External terminal strip for 24-volt wiring
External gas pipe connection
Sealed junction box for supply wiring
Full fan guard
Built-in disconnect switch (20A @ 115V Rating)
Single-stage propane gas valve (field adjustable for
operation to 9,000 ft.)*
Two-stage gas valve (sizes 60-400)
409 or 316 stainless steel heat exchangers
Totally enclosed fan motor (sizes 30-400)
Horizontal or vertical combustion air/vent kit including
concentric adapter
Thermostat
Thermostat guard with locking cover
Integrated vertical louvers
Integrated 30° & 60° downturn nozzles
Gas conversion kits (natural and propane)
Primary/secondary controls for zoning up to six units
Ceiling suspension kit - Sizes 30-125
Hanger kits for 1” pipe
Stepdown transformer (for 208/115, 230/115 or 460/115
supply voltage)
UDZ Series
Reznor® Model UDZ gas-fired unit heaters are available in 14 sizes
ranging from 30,000 to 400,000 BTUH gas input. Model UDZ heaters
are approved for installation in the United States and Canada by ETL.
Each size cabinet is easily suspended from either 2 or 4 suspension
points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling
mounting. The low voltage terminal strip on the outside of the cabinet
makes connecting control wiring easy with no panels to remove. The
addition of a “G” terminal to the strip, along with the new design of the
circuit board, allows for fan only operation (without adding relays).
Reznor model UDZ unit heaters offer a sleek design sure to complement
any space. The UDZ features a two-tone black and white powder coated,
scratch-resistant paint scheme with a single red louver. Each unit has
clean rounded corners and edges with no visible screws or fasteners, and
the bottom is embossed with the Reznor logo. Model UDZ unit heaters
provide the same superior performance customers have relied on for
more than 100 years along with added features that make servicing
the unit easier, installation safer and improve monitoring capabilities.
FEATURES and BENEFITS
OPTIONAL FEATURES
Separated Combustion, Low Static Axial
Fan Commercial/Industrial Unit Heaters
82 - 83% Thermal Efficiency
*Note: Pressure switch change required for installations above 6,000 ft.

Summary of content (8 pages)