User's Manual

Active RFID Tags: Features, Specifications, and Deployment Guidelines

NOTE: Depending on the model of your PDU, the location and/or label of the port may be different; if so, please

refer to the PDU user guide for the specific model in order to locate the proper port.

5. Mount the R170 PDU Sensor Tag according to the instructions presented below in the Mounting Guidelines

section.

R170 PDU Sensor Tag Mounting Guidelines

The following guidelines will help to ensure that you mount the R170 Sensor Tag for optimal functioning.

 Mount the R170 Sensor Tag on the outside and near the top or above the IT rack where the PDU is installed; this

helps to reduce interference with the radio frequency signal that can be caused by metal objects and structures.

 Remove the release liner from the back of the tag and press firmly to mount the tag to an upper exterior surface

of the rack.

 To help prevent potential problems that could result from the tag being bumped or snagged, employ a strain

relief method using the supplied tie-wrap and tie-wrap mount.