User's Manual
Active RFID Tags: Features, Specifications, and Deployment Guidelines
51
To mount M174-i IT Asset Tags using the Thin Loop tab (OTAB-i020), follow these guidelines:
• Thread the Loop tab around the desired mounting point (e.g. handle of the asset).
• Then remove the release liner on the end of the Loop tab and firmly press the adhesive strip onto the tab.
To mount M174-i IT Asset Tags using the Thumbscrew tab (OTAB-i030), follow these guidelines:
• Place the larger of the two holes over the thumbscrew on the IT asset and pull it down so that the smaller hole is
behind the thumbscrew.
• Then carefully remove the release liner from the adhesive pad.
• Fold the adhesive pad over and firmly press it against the tab to complete the installation.
Release liner
Adhesive after being pressed down onto tab