User Guide
Table Of Contents
1 2 3
4
5 6 7 8 9
Reader Operation
20
INfinity 610 User’s Guide
4.2. Deployed Reader Operation with RCT
Once your readers are deployed, you can access them directly using the
embedded Reader Configuration Tool (RCT). To access a particular reader,
perform the following:
1 Enter the reader’s IP address into your web browser or press the
button on the main RST page.
2 The reader’s RCT interface is displayed.
3 Log into the reader. Press
Login for the login screen.
4 The default login is
guest. If you need administrator privileges, login as
admin and enter readeradmin as the password.
5 Press
Submit.
6 Select
Basic Configuration →Setup Antenna/Cables to configure the
antennas, gain, and power settings.