User Guide

1 2 3 4 5
6
7 8 9
Reader Configuration Tool
56
INfinity 610 User’s Guide
6.3.2. Expert Configuration – Tag
This page allows you to configure how the reader reports tags.
The INfinity 610 supports the ability to filter tags or eliminate tags from
being reported based on the conditions specified in the filter configuration
variables. The reader supports eight filters and each filter is specified by the
following configuration variables:
h enabled – Enables or disables the filter.
h inclusive – Indicates to either include tags that match (Inclusive) or
include tags that do not match (Exclusive) the tag filter.
h
mask – Mask (as an array of hex bytes) for the tag filter.
h
name – Name given to the tag filter
h
pattern – Pattern (as an array of hex bytes) for the tag filter
The following figure shows a small sample of the available variables.
NOTE
For details on tag
variables, refer to
the INfinity 610
Protocol Reference
Guide.