User Guide

SASL Installation Guide V2.13 - Part # ITCS-A-100-001v1.13 Sept 2012
5
Installation
MECHANICAL INSTALLATION
Each model of the ITCS-A-2xx family of SASL units is mounted slightly differently. SASL units
weigh up to 100 lbs (46.3 kg), so it is important to ensure that the structure, to which the SASL is to
be attached, is of sufficient strength. The SASL may be ceiling mounted, wall mounted or attached
to a suitable stand. A safety cable rated at three (3) times the hanging weight of the SASL and
associated hardware must be secured to a separate fixture and attached to the SASL mounting
bracket.
When mounting the SASL as a stand-alone unit, make sure that it is mounted the correct way up as
indicated by information in the Technical Manual, for the specific SASL. If the SASL is one of
several and is part of an ITCS network, then orient each SASL according to the ITCS system
installation drawings. If in doubt contact a member of our technical support team.
ITCS-A-200
The ITCS-A-200 SASL is provided in its standard configuration with a mounting bracket for
installation in a landscape orientation. When mounting the SASL refer to figure 3. Consult the
Technical Manual, for further information. Contact a member of our technical support team for
more information.
ITCS-A-202
The ITCS-A-202 SASL is only mounted in a landscape orientation because the array is symmetrical
there is no benefit to mounting the array in a portrait fashion. When mounting the SASL refer to
figure 3. Consult the Technical Manual, for further information. Contact a member of our technical
support team for more information.
When mounting the SASL as a stand-alone unit, make sure that it is mounted the correct way up as
indicated by information in the Technical Manual, for the specific SASL. If the SASL is one of
several and is part of an ITCS network, then orientate each SASL according to the ITCS system
installation drawings. If in doubt contact a member of our technical support team.
SAFETY WARNING
The ITCS-A-200 SASL weighs approximately 100 lbs. (49 kg), and ITCS-A-202 weighs
approximately 50 lbs (23kg). These units should only be installed using suitable safety and lifting
equipment. Ensure that the wall fixings or mounting hardware is suitably rated.