User Guide

SASL Installation Guide V2.13 - Part # ITCS-A-100-001v1.13 Sept 2012
7
WARNING
The SASL is not user serviceable. Dis-assembly or opening the SASL will cause damage to
its operation, will void any warranty and may invalidate the FCC type approval
NON IONIZING RADIATION
This unit incorporates a Radio Frequency Transmitter and should therefore be installed and
operated so as to avoid exposure of any persons to unsafe emissions. The FCC requires that any
antenna, which includes the SASL, be mounted so that a separation distance of at least 23cm is
provided from all persons. See FCC Radiation Exposure Statement in the Safety Instructions
section of this guide.
NOTICE FOR EUROPEAN INSTALLERS
The Installer shall ensure that he is familiar with any restrictions of the local EU Member
State on the use of this device and ensure compliance! Examples may include: restrictions
on geographic location or only for indoor use etc.
Due to differences between ETSI and FCC frequency bands, “Phase Ranging” Techniques
are not available with the ETSI version of the SASL.
USABLE FREQUENCY RANGE IN USA AND CANADA
In USA and Canada this device is factory programmed to operate in ISM 902MHz – 928MHz
band