User's Manual

22 Chapter 3 Software
pcProx Plus Configuration
This section is only available to configure selections when a two configuration device (pcProx Plus) is
connected to the utility.
Note: When a single configuration device is connected to the utility, the pcProx Plus
Configuration area is grayed out (as seen below) and selections within this area are not possible.
The pcProx Plus Configuration area allows for users to set-up two different configurations for their
device. The configurations could be either one 125 kHz and one 13.56 MHz, or two 125 kHz and two
13.56 MHz. The configurations can also be of the same card type. The device is set with two default
configuration settings, the HID Prox and RDR-758x Equivalent (covers 5 different card types; HID
iCLASS CSN, ISO 14443A CSN, ISO 15693A CSN, MIFARE CSN, MIFARE DESFire CSN).
Note: If configuring the system for HID 26 bit and HID 35 bit, remember to set one configuration
to read only 26 bits and the other configuration to read only 35 bits.
Configuration # (Number): This option provides the ability to switch between configurations.
Users can set and edit settings for two separate configurations quickly and easily.
Card Type Drop-Down Menu: As stated above, the device is set with two default configuration
settings, the HID Prox and RDR-758x Equivalent. This drop-down menu lets users choose the
desired card type for their own configuration settings. Each configuration has the ability to have
separate card types.
High Priority: Provides a pcProx Plus user the ability to give a certain configuration a higher
priority than another. This is especially useful in instances when a two card in one or multiple
cards are being used on one reader.
Configuration #
(Number)
Card Type
Drop-Down
High Priority