QUICK START GUIDE Wave ID® Plus Badge Readers RDR-80081AKU-V2
This document provides the following information: I. Connector Options II. Installing the Configuration Utility Software III. Reader Setup IV. Configuring the Reader V. Troubleshooting Congratulations on the purchase of your Wave ID® or Wave ID® Plus reader! Configuration of rf IDEAS readers is easy. With our “plug and play” design, you will be able to quickly take advantage of a more secure environment in your business, school, or organization.
1. Connector Options There are two connector options available with the reader for data input and output. Connector Type Output Data Type USB USB Keystroke SDK Virtual Com Port: ASCII or SDK The product you have purchased may need to be configured before use. The configuration software and support documents can be downloaded from our product support page at: http://www.rfIDEAS.
. Configuring the Reader To configure the Reader for operation, complete the following steps: 7. Start the pcProx Configuration Utility software. 8. Plug the reader into the workstation’s USB or DB9 port. a. If the reader has a USB connector, verify the workstation detected the connection automatically using Windows Device Manager. b. If the reader has a DB9 connector, verify the correct COM port using Windows Device Manager. 9.
License Agreement and End-User License Agreement End-User License Agreement for RF IDeas™ SOFTWARE and HARDWARE - rfIDEAS’ WaveID®, Proximity Activated Readers, Software Developer’s Kit, and Proximity Reader DLLs, and Protocol(s). by a licensed end user in accordance with Section 1.1. A single license for the SOFTWARE PRODUCT may not be shared or used concurrently by other end users.
PORTION OF THE PRODUCT are owned by rf IDEAS or its suppliers. The PRODUCT and SOFTWARE PORTION OF THE PRODUCT is protected by copyright laws and international treaty provisions. You may not copy the printed materials accompanying the PRODUCT. 5. DUAL-MEDIA SOFTWARE. You may receive the SOFTWARE PORTION OF THE PRODUCT in more than one medium. Regardless of the type or size of medium you receive; you may use only one medium that is appropriate for your single computer.
rf IDEAS, Inc. 425 N. Martingale Road, Suite 1680, Schaumburg, IL 60173 USA Toll Free: 866-439-4884 Voice: 847-870-1723 Fax: 847-483-1129 www.rfIDEAS.com ® is a registered trademark of rf IDEAS Inc. Trademarks not belonging to rf IDEAS are property of their respective companies. ©2022 rf IDEAS, Inc. All rights reserved. Products are subject to change without notice.
