User's Manual
(
C
onnect
--C
ont.)
Connect
to
USB: Connects
to
current specified reader through
USB
Connect
to
Serial: Connects
to
current specified reader through
serial
Connect
to
Ethernet TCP/IP: Connects
to
current specified reader through ethernet T
C
P
/IP
Why
use
the
Connect
t
o
f
eatur
e
?
The connect
to
feature allows
the utility to
connect
to a
device through
the
specified
port
upon selection. This
is
especially helpful when users
are
switching
out
and changing devices
with
different
connections.
Disconnect: Disconnects
all
connected devices
from
every available interface connection
from the
configuration
utilit
y
.
Note:
For further information on
the
disconnect option, see
the
disconnect portion
of the
Icon Toolbar section on page 21
of this manual.
Device
Menu
The device menu
lists the
options
for
resetting,
writing
t
o
,
and reading
the
device’s data
memory
.
The
device menu options are altered depending on
the
type
of
device
that is
connected.
A single
configuration reader device has different device menu options than a
two
configuration reader
device.
Single
C
onfigur
ation Readers:
Reset
to
Factory Defaults: Resets
all
configuration parameters
to
factory
defaults.
Read Settings: Displays
the
current connected device
configuration
Write
Settings:
Writes the
current configuration settings
to the
connected
device
Note:
For more information on
the Write
Settings option, see
the Write Settings/W
rit
e
Active portion
of the
Icon Toolbar section on page 21
of this manual.
pcProx Plus
- 2
C
onfigur
ation Reader:
Reset
to
Defaults: Resets
all
configuration parameters
to
defaults. Defaults are set as
HID
Prox and RDR-758x
E
quivalent
(
c
ov
er
s
5
different card
t
ypes;
HID
iCLASS CSN, ISO
14443A
CSN, ISO 15693A CSN, MIFARE CSN, MIFARE DESFire
CSN)
Reset
to
Stored Settings: This selection allows users
to
reset
the
device
to their own
personally defined stored
settings.
Write
Stored Settings:
writes the
current configuration settings
to
stored
settings
Note:
Stored settings are defined as configuration settings created
by
a user
and
set
/
writt
en
to the
device through
the utility
as a stored
settings.