User's Manual

ManualsBrandsRF Ideas ManualsElectronicsMulti Protocol USB RFID Reader

Standard

Configuration

This Standard Configuration area provides

all the

options and details necessary

to

configure

a

connected

device.

USB

Serial:

RS-

232

and

V

ir

tual

CO

M

Ethernet

Connect

Tab

The connect

tab

offers

the

various ways a device can connect

to the

configuration

utilit

y

.

The

different selections allow

the

user

to

choose

the

connection type

for the

specific logical protocol

of

their

r

eader

.

Note:

Only one connection type

at

a

time will

be

shown.

USB: Make

this

selection

if the

connected device has a

USB

logical protocol. The

utility will then

proceed

to

scan any available USB bus

for

connected

devices.

Serial: RS-232 and

Virtual COM

Ports: This option provides devices

that

are RS-232

or Virtual

COM port

logical protocols

to

connect

to the

utilit

y

.

This section scans

for

RS-232, physical

COM

port

devices,

virtual COM port

devices, including

USB,

CDC and PCMCIA

devices.

When

making

this

selection,

the

lower and upper

limits of the COM

ports

to

scan need

to be

set. The

port

values range

from

1

to

256. The default

COM

ports are set

at

1

thru 8.

Default

1..8:

This option sets

the COM port

values back

to the

default

of

1 and

8.

Note:

Serial devices may slow when scanning a wide

port range.