User's Manual
Wiegand
to
Keystroke Data
F
ormat
Strip Leading and Trailing
Bit
Count: By altering
the
numbers
in the
leading and trailing
bit count,
users have
the
option
to strip
and discard
bits from the
card data. The leading and trailing
bit
counts can be set
to
range
from 0 to
15.
Send FAC
: (Facility Access Code) Allows
for
option
to
display
the
FAC
code
Send FAC as Hexadecimal Number:
Will
send FAC as a hex number. The default
is
set
to output
as a
decimal.
Send ID: This selection keystrokes
out the ID
portion
of the
card
data.
Note:
When
checked uses
the
defined
ID field bit
count bits.
When
unchecked uses
all non
parity bits.
Send
ID
as Hexadecimal Number:
Will
send
ID
as a hex number. The default
is
set
to output
as
a
decimal.
ID
Field
Bit
Count: Sets
the
number
of bits in the ID field from 0 to
80
Fix length
F
A
C/
ID
Fields: This option
will
make
the
FAC and
ID
a fixed
length
FAC Digits: This
will
alter
the
FAC
output by
forcing a set length
of
digits, between
0 to
32,
to be
displayed.
ID
Digits: This
will
alter
the ID output by
forcing a set length
of
digits, between
0 to
32,
to be
displayed.
Advanced
Settings
Only Read Cards
With
This
Bit
Count: Select
this
option
to filter out
cards
that
are
not the
specified
bit
number. The
bit
number
is
specified
in the
box
to the right
and can range
from 2
t
o
255
bits.
Display Hex
in
Lowercase:
Will
display hex
in
lowercase
format.
Note: The Send FAC as Hexadecimal
or
Send
ID
as Hexadecimal must
first
be selected
before
this
option can be
provided.
Use Numeric Keypad: Defines which keypad
will
be used
(whether
across
the top or with keypad)
AZERTY Keyboard Shif
t
Lock: This selection
will output the
data as
if it
were being
output from an
AZERTY
keyboard.