Owner`s manual

WAVECOM

Sr. owner’s manual 11

How to transmit audio/video from a miniature CCD

camera

In conjunction with a miniature CCD camera (sold separately - see accessories),

WAVECOM

Sr. becomes a portable wireless security system. First, fasten the CCD

camera to any object using its clip adapter so that it views the scene you wish to

monitor, such as a sleeping baby, children at play, the elderly, or the infirm. Then,

follow the instructions below.

Step 1. Plug the single end of the special plug adapter that comes with the

miniature CCD camera into the bottom of the camera.

Step 2. Make sure the WAVECOM

Sr. ON/OFF switch is in the OFF position.

Insert the two A/V plugs on the other end of the plug adapter into the

transmitter’s jacks - the black one into the video jack and the red one into

the AUDIO LEFT jack.

Step 3. Insert the power plug from the special plug adapter into the 12V DC OUT

jack on the side of the transmitter. This provides power to the CCD

camera.

Step 4. Plug one end of the provided power adapter into the back of the

WAVECOM

Sr. transmitter and the other end into any 120-volt wall

outlet. Turn the ON/OFF switch to ON position and indicator light should

go on.

Step 5. Locate and orient the transmitter according to the chapter of this manual

titled “Orienting Units for Optimal Performance.”