Owner`s manual

WAVECOM

Sr. owner’s manual 13

How to transmit audio from your stereo receiver

To enjoy sound from your CD player, cassette deck or radio on speakers in another

room, you can connect WAVECOM

Sr. to your stereo receiver. To use this

feature, you must connect either powered speakers or another amplifier to the

WAVECOM

Sr. receiver at the remote site (see “Connecting the Receiver”).

Step 1. Make sure the WAVECOM

Sr. ON/OFF switch is in the OFF position.

Connect one set of audio/video (A/V) cables to the two audio jacks (red and

white) of the transmitter and to the audio jacks on the back of your stereo

receiver labeled TAPE OUT. Be sure the red and white plugs match the

red and white jacks on both the stereo receiver and the transmitter. The

yellow video plug is not used.

Step 2. Plug on end of the provided power adapter into the back of the

WAVECOM

Sr. transmitter and the other end into any 120-volt wall

outlet. Turn the ON/OFF switch to ON position and indicator light should

go on.

Step 3. Locate and orient the transmitter according to the chapter of this manual

titled “Orienting Units for Optimal Performance.”