Owner`s manual

WAVECOM

Sr. owner’s manual 14

How to transmit audio from your CD player or

cassette deck

Your can transmit audio either directly from your CD player or cassette deck, or you

can connect them to your stereo receiver. For either scenario, to enjoy audio on

remote speakers, you must connect either powered speakers or an amplifier to the

WAVECOM

Sr. receiver at the remote site (see “Connecting the Receiver”).

Step 1. Make sure the WAVECOM

Sr. ON/OFF switch is in the OFF position.

Connect one set of audio/video (A/V) cables to the two audio jacks (red and

white) of the transmitter and to the LINE OUT jacks of the CD player or

cassette player. Be sure the red and white plugs match the red and white

jacks on both the transmitter and the CD/cassette player. The yellow

video plug is not used.

Step 2. Plug one end of the provided power adapter into the back of the

WAVECOM

Sr. transmitter and the other end into any 120-volt wall

outlet. Turn the ON/OFF switch to ON position and indicator light should

go on.

Step 3. Locate and orient the transmitter according to the chapter of this manual

titled “Orienting Units for Optimal Performance.”